Month: September 2020

As a common heterocyclic compound, it belongs to copper-catalyst compound, name is Copper(I) bromide, and cas is 7787-70-4, its synthesis route is as follows.,7787-70-4

Example 1 2-(Carboxy-5-nitro-phenyl)malonic acid dimethyl ester A solution of 2-chloro-4-nitrobenzoic acid (75g, 372mmol) in dimethyl malonate (900mL, 20 equivalents) was degassed with nitrogen for 15min. Copper (I) bromide (5.4g, 37mmol) was added in one portion. Sodium methoxide (48.3g, 894mmol) was added in one portion to the solution while stirring and the contents exothermed to 48C. Fifteen minutes later, the contents were heated to 70C for 24hrs. The reaction was complete by nmr. Water (900mL) was added to the cooled reaction followed by hexanes (900mL). The aqueous layer was separated, toluene (900mL) added, the solution filtered through Celite, and the aqueous layer separated. Fresh toluene (1800mL) was added to the aqueous layer and the biphasic mixture acidified with 6 N aqueous HCI (90mL). A white precipitate formed and the contents were stirred for 18hrs. The product was filtered off and dried to give a white solid, 78.1g (70%, mp 153C). IR 2923, 2853, 1750, 1728, 1705, 1458, 1376, 1352, 1305, 1261 cm-1. 1H NMR (CD3)2SO delta8.37 (d, J = 2 Hz, 1H), 8.30 (d, J = 1Hz, 2H), 5.82 (s, 1H), 3.83 (s, 6H). 13C NMR (CD3)2SO delta168.0, 167.3, 149.4, 137.1, 135.8, 132.5, 125.4, 123.7, 54.5, 53.4. Anal. Calcd for C11H10NO8: C, 48.49; H, 3.73; N, 4.71. Found: C, 48.27; H, 3.72; N, 4.76.

With the complex challenges of chemical substances, we look forward to future research findings about 7787-70-4,belong copper-catalyst compound

Reference£º
Patent; PFIZER INC.; EP887345; (1998); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

It is a common heterocyclic compound, the copper-catalyst compound, Copper(I) bromide, cas is 7787-70-4 its synthesis route is as follows.

General procedure: Compound 5c was prepared as described for 5a. In this respect, 2 (100 mg, 0.160 mmol) was reacted with [CuBr] (3c) (23 mg, 0.160 mmol). Appropriate work-up, gave 5c (111 mg, 0.144 mmol, 90% based on 2) as a brown solid Mp.: 180 C. IR (KBr, cm-1): nuC?C 1983 (w). 1H NMR (d6-DMSO, delta): 0.24 (s, 9 H, SiMe3), 0.30 (s, 9 H, SiMe3), 7.61 (ddd, 3JH7H6 = 4.7 Hz, 3JH7H8 = 7.3 Hz; 1 H, H7), 7.95 (ddd, 3JH2H1 = 6.3 Hz, 3JH2H3 = 6.6 Hz; 1 H, H2), 8.07 (ddd, 4JH8H6 = 1.5 Hz, 3JH8H7 = 7.3 Hz, 3JH8H9 = 7.8 Hz; 1 H, H8), 8.43 (m, 4JH3H1 = 1.0 Hz, 3JH3H2 = 6.6 Hz; 3JH3H4 = 8.0 Hz, 3JH9H8 = 7.8 Hz; 2 H, H3, H9), 8.67 (dd, 3JH6H7 = 4.7 Hz, 4JH6H8 = 1.5 Hz, 1 H, H6), 8.85 (d, 3JH4H3 = 8.0 Hz, 1 H, H4), 9.05 (dd, 3JH1H2 = 6.3 Hz, 1 H, 4JH1H3 = 1.0 Hz, 1 H, H1), 9.95 (s, 1 H, H5), 10.06 (s, 1 H, H10). ESI-MS (m/z (rel. intens.) in thf: [M++Br] 687 (100), [M+-CuBr + K] 662 (25). Anal. Calc. for C24H28N4CuBrPtSi2 (767.21 g/mol): C, 37.57; H, 3.67; N, 7.30. Found: C, 37.68; H, 3.63; N, 6.92%.

7787-70-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,7787-70-4 ,Copper(I) bromide, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Al-Anber, Mohammed; Wetzold, Nora; Walfort, Bernhard; Rueffer, Tobias; Lang, Heinrich; Inorganica Chimica Acta; vol. 398; (2013); p. 124 – 131;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7787-70-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Copper(I) bromide, cas is 7787-70-4,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

General procedure: The complexes were typically obtained from the reaction of the copper halide (CuX) with the appropriate camphor ligand in THF (3 mL) upon stirring for ca. 18 h at room temperature. Filtration of the precipitate, washing with n-pentane (ca. 6mL) and drying under vacuum affords the Cu(I) complex.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Copper(I) bromide, 7787-70-4

Reference£º
Article; Fernandes, Tiago A.; Mendes, Filipa; Roseiro, Alexandra P.S.; Santos, Isabel; Carvalho, M. Fernanda N.N.; Polyhedron; vol. 87; (2015); p. 215 – 219;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

34946-82-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Copper(II) trifluoromethanesulfonate, cas is 34946-82-2,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

A solution of imidazo[l,2-b]pyridazine (impy) (758 mg, 6.36 mmol, 10 equiv.) in MeOH (1 mL) was added dropwise at 55C to a solution of Cu(OTf)2 (230 mg, 0.636 mmol, 1.0 equiv.) in MeOH (1 mL). The blue precipitate which formed was washed with Et20 (3 x 2 mL), then recrystallized from hot MeOH to afford [Cu(OTf)2(impy)4] (324 mg, 0.387 mmol. 61%). Anal. Calcd. for C26H2OCUF6NI206S2: C, 37.26; H, 2.41; N, 20.05. Found: C, 37.07; H, 2.33; N, 19.91; IR (ATR, neat): v (cm 1) = 2981, 1620, 1541, 1503, 1374, 1352, 1306, 1281, 1241, 1221, 1149, 1071, 1027, 950, 918, 879, 801, 755, 733, 632.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Copper(II) trifluoromethanesulfonate, 34946-82-2

Reference£º
Patent; OXFORD UNIVERSITY INNOVATION LIMITED; GOUVERNEUR, Veronique; CORNELISSEN, Bart; WILSON, Thomas Charles; (152 pag.)WO2019/186135; (2019); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Copper(I) bromide, cas is 7787-70-4, it is a common heterocyclic compound, the copper-catalyst compound, its synthesis route is as follows.,7787-70-4

General procedure: To a solution of (S,S)-iPr-pheboxH (0.051g, 0.173mmol) in dichloromethane (15mL), the corresponding copper(I) salt CuX (X=Cl, Br, I) (0.347mmol) was added and the mixture stirred at room temperature during 24h. Then, the reaction mixture was filtered via cannula, concentrated under reduced pressure to ca. 2mL and diethyl ether/n-hexane (1:2) (30mL) was added. The resulting solid was washed with n-hexane (3¡Á5mL) and vacuum-dried.

7787-70-4 is used more and more widely, we look forward to future research findings about Copper(I) bromide

Reference£º
Article; Vega, Esmeralda; De Julian, Eire; Borrajo, Gustavo; Diez, Josefina; Lastra, Elena; Gamasa, M. Pilar; Polyhedron; vol. 94; (2015); p. 59 – 66;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Name is Copper(II) trifluoromethanesulfonate, as a common heterocyclic compound, it belongs to copper-catalyst compound, and cas is 34946-82-2, its synthesis route is as follows.

General procedure: A mixture of ligand L (23.1 mg, 55 mumol) and appropriate metalsalt (55 mumol) in nitromethane (20 mL) was stirred at room temperaturefor 48 h under the normal atmosphere. The complexeswere isolated as a solids by evaporation of the solvent and followedby a dissolution of the residue in the minimum volume of CH3CNand precipitation of the complexes by the gradual addition ofether. Obtained solids were filtered off and dried in air.

34946-82-2, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,34946-82-2 ,Copper(II) trifluoromethanesulfonate, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Wa??sa-Chorab, Monika; Marcinkowski, Dawid; Kubicki, Maciej; Hnatejko, Zbigniew; Patroniak, Violetta; Polyhedron; vol. 118; (2016); p. 1 – 5;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7787-70-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Copper(I) bromide, cas is 7787-70-4,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

Synthesis of [(SIMes)CuBr]. In an oven-dried vial, copper(I) bromide (0.522 g, 3.63 mmol), SIMes.HCl (0.86 g, 2.52 mmol) and sodium tert-butoxide (0.243 g, 2.52 mmol) were loaded inside a glovebox and stirred in dry THF (18 mL) overnight at room temperature outside of the glovebox. After filtration of the reaction mixture through a plug of Celite, the filtrate was mixed with hexane to form a precipitate. A second filtration afforded 0.808 g (71% yield) of the title complex as an off-white solid.Spectroscopic and analytical data for [(SIMes)CuBr]: 1H NMR (300 MHz, [D6]acetone): delta=7.01 (s, 4H, HAr), 4.16 (s, 4H, NCH2), 2.37 (s, 12H, ArCH3), 2.29 (s, 6H, ArCH3); 13C NMR (75 MHz, CDCl3): delta=202.6 (C, NCN), 138.5 (C, CAr), 135.3 (CH, CAr), 135.0 (C, CAr), 129.7 (CH, CAr), 51.0 (CH2, NCH2), 21.0 (CH3, ArCH3), 18.0 (CH3, ArCH3); Elemental analysis calcd for C21H26BrCuN2 (449.89): C, 56.06; H, 5.83; N, 6.23. Found: C, 55.98; H, 5.64; N, 6.21%.

The chemical industry reduces the impact on the environment during synthesis,7787-70-4,Copper(I) bromide,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Institut Catala d’Investigacio Quimica; Institucio Catalana de Recerca i Estudis Avancats; US2009/69569; (2009); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

It is a common heterocyclic compound, the copper-catalyst compound, Copper(II) trifluoromethanesulfonate, cas is 34946-82-2 its synthesis route is as follows.

Cu (CF3 SO3 )2 And 4 – (3 – (4H – 1,2, 4 – triazole -4 – yl) phenyl) – 4H – 1,2, 4 – triazole) (L) in a molar ratio of 1:1; L (0.0424 g, 0.2 mmol), Cu (CF3 SO3 )2 (0.0691 g, 0.2 mmol), H2 O (6 ml), CH3 CN (4 ml), water heat 160 o C three days after cooling to room temperature. After operates the cauldron X – ray single crystal diffraction analysis is yellow rod-like crystal. Yield: 35% (calculated on the basis of L). Elemental analysis (C33 H26 Cu3 F9 N18 O10 S3 ) Theoretical value (%): C, 30.67; H, 2.03; N, 19.51. The measured value: C, 30.69; H, 2.06; N, 19.59. We also tried other proportions, for example Cu (CF3 SO3 )2 And L in a molar ratio of 2:1, irrespective of the length of the water heat reaction time, are not crystalline compound. Therefore Cu (CF3 SO3 )2 And L in a molar ratio of 1:1 is the best reaction mixture ratio.

34946-82-2, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,34946-82-2 ,Copper(II) trifluoromethanesulfonate, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Tianjin Normal University; Wang, Ying; (12 pag.)CN104557982; (2017); B;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

It is a common heterocyclic compound, the copper-catalyst compound, Copper(I) bromide, cas is 7787-70-4 its synthesis route is as follows.

General procedure: 0.022g (0.222mmol) of CuCl was added to 0.180g (0.109mmol) of [PPh4]2[1] dissolved in 20mL of MeCN solution at -35C. After stirring the resultant solution for 5min, the yellowish brown solution formed, which was filtered, and the filtrate was concentrated. A solution of Et2O (60mL) was added into the filtrate to precipitate the product at -35C. The precipitate was then washed with Et2O and dried to give [PPh4]2[3a] (0.107g, 0.058mmol, 53% based on [PPh4]2[1]). Similarly, under the same reaction conditions, using CuBr, we have isolated a yellowish brown solid of [PPh4]2[3b] (80% based on [PPh4]2[1]) upon crystallization from Et2O/MeCN.

7787-70-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,7787-70-4 ,Copper(I) bromide, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Shieh, Minghuey; Miu, Chia-Yeh; Liu, Yu-Hsin; Chu, Yen-Yi; Hsing, Kai-Jieah; Chiu, Jung-I; Lee, Chung-Feng; Journal of Organometallic Chemistry; vol. 815-816; (2016); p. 74 – 83;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Name is Copper(II) trifluoromethanesulfonate, as a common heterocyclic compound, it belongs to copper-catalyst compound, and cas is 34946-82-2, its synthesis route is as follows.

A solution of Cu(OTf)2 (90.0 mg, 0.249 mM, OTf = trifluormethansulfonate) in methanol was added to a solution of HLpz (53.5 mg,0.250 mM) and triethylamine (25.0 mg, 0.250 mM) in methanol, affording a dark green solution. A solution of excess 4,4-bipyridine (4,4-bipy) was layered on the above solution, from which purple crystals of 1 suitable for X-ray analysis were obtained. Yield: 86 mg, 68%. Anal. Calcd for C34H26Cu2F6N10O8S2: C, 40.52; H, 2.60; N, 13.90. Found: C, 40.27;H, 2.53; N, 13.63. FTIR (KBr): 3447, 1647, 1416, 1380, 1291, 1245, 1224, 1158, 1033,816, 772, 638, 518 cm-1. ESI-MS (MeOH): m/z = 276 [Cu(Lpz)]+, 432 [Cu(Lpz)(4,4-bipy)]+, 490 [Cu(Lpz)2 + H]+.

34946-82-2, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,34946-82-2 ,Copper(II) trifluoromethanesulfonate, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Houser, Robert P.; Wang, Zhaodong; Powell, Douglas R.; Hubin, Timothy J.; Journal of Coordination Chemistry; vol. 66; 23; (2013); p. 4080 – 4092;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”