Category: 1111-67-7

Related Products of 1111-67-7, As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world. In an article, once mentioned the application of Related Products of 1111-67-7, Name is Cuprous thiocyanate,molecular formula is CCuNS, is a conventional compound. this article was the specific content is as follows.

Thiolate layers on metal sulfides characterised by XPS, ToF-SIMS and NEXAFS spectroscopy

Surface spectroscopic characterisation of some Cu and Ag thiolate multilayers on metal and metal sulfide substrates was undertaken to establish unequivocally the composition and possible orientation of the multilayer species. This information was sought to attempt to explain the undiminished floatability of sulfide minerals observed for collector coverage exceeding a monolayer. The thiol collectors investigated were dithiophosphate and 2-mercaptobenzothiazole (MBT), and bulk CuMBT and AgMBT complexes were prepared for comparison with the corresponding multilayers. Surface optimised synchrotron X-ray photoelectron spectra and partial electron yield near-edge X-ray absorption fine structure (NEXAFS) spectra confirmed that the Cu dithiolate, detected by secondary ion mass spectroscopy (SIMS), was no more than a minor constituent of the corresponding multilayer. The photoelectron spectra for multilayer CuMBT and AgMBT were similar to those for the corresponding bulk complexes. NEXAFS spectroscopy detected some CuII in bulk CuMBT prepared from cupric ions but not cuprous. The SIMS data were consistent with multilayer patches or islands on top of a chemisorbed monolayer and hence continued exposure of the monolayer in the presence of the multilayer. For each multilayer investigated, the SIMS data provided no evidence to support a multinuclear cluster structure as is present in the corresponding bulk thiolate, but nor could they exclude such a possibility. Angle-dependent NEXAFS spectroscopy at the N K-edge confirmed that MBT monolayers were aligned and revealed that the metal thiolate multilayer was not aligned relative to the substrate, but might nevertheless have been ordered in a cluster structure. It was surmised that undiminished floatability of sulfide minerals with multilayer collector coverage could probably be attributed to the patch-wise nature of the multilayer.

But sometimes, even after several years of basic chemistry education, it is not easy to form a clear picture on how they govern reactivity! Read on for other articles about Electric Literature of 61948-86-5!, Related Products of 1111-67-7

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

Application of 1111-67-7, Catalysts function by providing an alternate reaction mechanism that has a lower activation energy than would be found in the absence of the catalyst. In some cases, the catalyzed mechanism may include additional steps. In an article, authors is George Njoroge, once mentioned the application of Application of 1111-67-7, Name is Cuprous thiocyanate,molecular formula is CCuNS, is a conventional compound.

Structure-activity relationship of 3-substituted N-(pyridinylacetyl)-4- (8-chloro-5,6-dihydro-11H-benzo[5,6]cyclohepta[1,2-b]pyridin-11-ylidene)- piperidine inhibitors of farnesyl-protein transferase: Design and synthesis of in vivo active antitumor compounds

Novel tricyclic Ras farnesyl-protein transferase (FPT) inhibitors are described. A comprehensive structure-activity relationship (SAR) study of compounds arising from substitution at the 3-position of the tricyclic pyridine ring system has been explored. In the case of halogens, the chloro, bromo, and lode analogues 19, 22, and 28 were found to be equipotent. However, the fluoro analogue 17 was an order of magnitude less active. Whereas a small alkyl substituent such as a methyl group resulted in a very potent FPT inhibitor (SCH 56580), introduction of bulky substituents such as tert-butyl compound 33, or a phenyl group, compound 29, resulted in inactive FPT inhibitors. Polar groups at the 3-position such as amine 5, alkylamino 6, and hydroxyl 12 were less active. Whereas compound SCH 44342 did not show appreciable in vive antitumor activity, the 3-bromo-substituted pyridyl N- oxide amide analogue 38 was a potent FPT inhibitor that reduced tumor growth by 81% when administered q.i.d. at 50 mpk and 52% at 10 mpk. These compounds are nonpeptidic and do not contain sulfhydryl groups. They selectively inhibit FPT and not geranylgeranyl-protein transferase-1 (GGPT-1). They also inhibit H-Ras processing in COS monkey kidney cells and soft agar growth of Ras-transformed cells.

Interested yet? Keep reading other articles of Application In Synthesis of 1-Methyl-3,4-dihydroisoquinoline!, Application of 1111-67-7

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, causing turnover rates to depend strongly on interfacial structure and composition, Computed Properties of CCuNS, Name is Cuprous thiocyanate, belongs to copper-catalyst compound, is a common compound. Computed Properties of CCuNSIn an article, authors is Azri, Faiza, once mentioned the new application about Computed Properties of CCuNS.

Electron and hole transport layers optimization by numerical simulation of a perovskite solar cell

In this paper an n-i-p perovskite solar cell was studied using SCAPS simulator. The primary solar cell’s structure is FTO/ITO/Perovskite/PEDOT:PSS/Au which has achieved a power conversion efficiency of eta ? 13.94%. In order to enhance its performance, several materials were suggested as electron and hole transport layers (ETL and HTL). Among the proposed ETL materials it was found that Zinc oxide (ZnO) and titanium dioxide (TiO2) are the most adequate materials. For the HTL materials, among the proposed materials Copper (I) thiocyanate (CuSCN) forms the appropriate one. Also, the solar cell performance was improved by optimizing the absorber thickness which was found to be 1 mum. With these considerations the power conversion efficiency reached 25.02%. In addition, the detrimental effect of defects at the perovskite/TiO2 interface on the solar cell performance is also presented.

Catalysts are substances that increase the reaction rate of a chemical reaction without being consumed in the process. A catalyst, does not appear in the overall stoichiometry of the reaction it catalyzes. you can also check out more blogs about HPLC of Formula: C34H28O2Pd!, Computed Properties of CCuNS

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 1111-67-7, Name is Cuprous thiocyanate, belongs to copper-catalyst compound, is a common compound. name: Cuprous thiocyanateIn an article, once mentioned the new application about 1111-67-7.

CHARACTERIZATION OF THE ADDUCTS FORMED BY Cu(CN) AND Cu(NCS) WITH BIQUINOLINE. THE CRYSTAL STRUCTURE OF THE POLYMERIC CYANO-COMPOUND CONTAINING BOTH LINEAR AND TETRAHEDRALLY CO-ORDINATED COPPER(I), <n>

The salts Cu(CN) and Cu(NCS) react with 2,2′-biquinoline (bq = C18H12N2) to give the adducts <n> (1) and <n> (2).Complex (1) crystallyzes in space group C2/m with cell dimensions a = 13.626(2), b = 15.322(2), c = 7.908(1) Angstroem, beta = 95.89(1) deg, and Z = 2.It consists of chains of CN-bridged copper atoms, each copper being either linearly or tetrahedrally co-ordinated.The tetrahedral copper is also co-ordinated to bq.Pairs of bq molecules belonging to paralell chains stack with an interplanar spacing of 3.35 Angstroem.Complex (2) is microcrystalline and from hot dimethyl sulphoxide gives crystals of (3).The polarization properties of the i.r. and electronic bands of complex (1) have been determined.In the optical spectrum two metal-to-ligand charge-transfer transitions could be detected.Comparison of the spectroscopic properties of the three compounds indicates a lower degree of polymerization for (3).

Catalysts are substances that increase the reaction rate of a chemical reaction without being consumed in the process. A catalyst, does not appear in the overall stoichiometry of the reaction it catalyzes. you can also check out more blogs about Related Products of 1679-47-6!, name: Cuprous thiocyanate

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

Reference of 1111-67-7, As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world. In an article, once mentioned the application of Reference of 1111-67-7, Name is Cuprous thiocyanate,molecular formula is CCuNS, is a conventional compound. this article was the specific content is as follows.

Improving the efficiency and stability of inverted perovskite solar cells by CuSCN-doped PEDOT:PSS

Hole transport layer (HTL) is important in inverted perovskite solar cells (PSCs) to facilitate the hole extraction and suppress the charge recombination for high device performance. Based on the widely used HTL material of poly(ethylenedioxythiophene) (PEDOT):poly(styrenesulfonate) (PSS), we proposed a new HTL modification method using the widely available copper(I) thiocyanate (CuSCN); the doping of CuSCN NH3 [aq] in PEDOT:PSS followed by low-temperature annealing results in reduced energy barrier, improved charge extraction efficiency and increased the mean size of perovskite crystal of the PEDOT:PSS-CuSCN HTL-based inverted PSCs. Significantly improved device performance was observed with open current voltage over 1.0 V and power conversion efficiency (PCE) up to 15.3%, which is 16% higher in PCE than that of the PEDOT:PSS-based PSCs. More impressively, with a lower acidity than PEDOT:PSS, the PEDOT:PSS-CuSCN HTL enables excellent long-term stability of the inverted PSCs, exhibiting almost doubly improved device stability at the same storage condition. Thus, the successful application of CuSCN doping in PEDOT:PSS HTLs should provide a novel approach for the development of high-performance HTLs for highly efficient and stable PSCs.

A reaction mechanism is the microscopic path by which reactants are transformed into products. Each step is an elementary reaction. In my other articles, you can also check out more blogs about 1111-67-7

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

Application of 1111-67-7, Catalysts function by providing an alternate reaction mechanism that has a lower activation energy than would be found in the absence of the catalyst. In some cases, the catalyzed mechanism may include additional steps. In an article, authors is Linert, once mentioned the application of Application of 1111-67-7, Name is Cuprous thiocyanate,molecular formula is CCuNS, is a conventional compound.

Novel Cu(I) complexes of functionalized phosphines

Novel tertiary phosphines R?PR2 with additional functionalities in the substituent R have been designed and prepared according to literature procedures. The coordination behavior of the additional functionality in the organic moiety and the phosphorus atom towards different Cu(I) salts was investigated. These reactions resulted in polynuclear complexes with unexpected structures involving Cu(I) atoms with different coordination numbers in the same compound.

Note that a catalyst decreases the activation energy for both the forward and the reverse reactions and hence accelerates both the forward and the reverse reactions.Application of 1111-67-7, you can also check out more blogs aboutApplication of 1111-67-7

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 1111-67-7, Name is Cuprous thiocyanate, belongs to copper-catalyst compound, is a common compound. Formula: CCuNSIn an article, once mentioned the new application about 1111-67-7.

Synthesis, structure and fluorescence properties of a coordination polymer [Cu2(SCN)4(BPX)]n with 1D ladder-shaped structure

A coordination polymer, [Cu2(SCN)4(BPX)]n (BPX = 1,4-bis(pyridinium) xylol) was synthesized and characterized by IR spectrum, fluorescence spectrum and single crystal X-ray diffraction. Crystal structure revealed that the title compound crystallized in monoclinic system with space group P2(1)/c, a = 5.7540(7)A, b = 12.7203(15)A, c = 17.598(2)A, = 94.9940(10). Two SCN-ions served as bridging ligands to link two Cu(I) ions, giving rise to an eight-member ring. Furthermore, copper atom and sulfur atom of the eight-member ring bonded sulfur atom and copper atom of adjacent eight-member ring through the formation of Cu-S to form a small four-member ring. Thus, innumerable eight-member rings alternately linked four-member rings each other to form an infinite one-dimensional ladder-shaped structure.

Interested yet? Keep reading other articles of Synthetic Route of 253-52-1!, Formula: CCuNS

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. Application In Synthesis of Cuprous thiocyanate, Name is Cuprous thiocyanate, Application In Synthesis of Cuprous thiocyanate, molecular formula is CCuNS. In a article，once mentioned of Application In Synthesis of Cuprous thiocyanate

Synthesis of perfluoroalkyl thioethers from aromatic thiocyanates by iron-catalysed decarboxylative perfluoroalkylation

Easily available aryl and heteroaryl thiocyanates were converted into the corresponding perfluoroalkyl thioethers via decarboxylation of potassium perfluoroalkylcarboxylates, catalysed by the inexpensive and environmentally benign iron(III) chloride.

Catalysts are substances that increase the reaction rate of a chemical reaction without being consumed in the process. A catalyst, does not appear in the overall stoichiometry of the reaction it catalyzes. you can also check out more blogs about Application of 54109-03-4!, Application In Synthesis of Cuprous thiocyanate

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. Quality Control of Cuprous thiocyanate, Name is Cuprous thiocyanate, Quality Control of Cuprous thiocyanate, molecular formula is CCuNS. In a article，once mentioned of Quality Control of Cuprous thiocyanate

Separation of propylene and propane by alkylimidazolium thiocyanate ionic liquids with Cu+ salt

Ionic liquids (ILs) coupled with Ag+ or Cu+ salts to form a new kind of reactive absorbent have been studied to separate light olefin from paraffin recently. In this work, we prepared two halogen-free alkylimidazolium thiocyanate ILs with cheaper cuprous thiocyanate, i.e., [Bmim]SCN-CuSCN and [Emim]SCN-CuSCN (Bmim, 1-butyl-3-methylimidazolium; Emim, 1-ethyl-3-methylimidazolium) and investigated their absorption capability for propylene, propane and mixture of both at 1-7 bar and 298-318 K. The effects of operating parameter including cation nature, temperature, pressure, Cu+ concentration and reuse of absorbent were investigated. Propylene shows a chemical absorption while propane does a physical one, and increasing Cu+ concentration effectively improves the absorption capability for propylene and the selectivity of propylene/propane. [Bmim]SCN-CuSCN has higher absorption capability and selectivity for propylene than [Emim]SCN-CuSCN, e.g., [Bmim]SCN-CuSCN-1.5 M can absorb 0.12 mol of propylene per liter while 0.012 mol of propane per liter at 1 bar and 298 K, with a selectivity of 10, which is comparable to some other ILs-Ag+ salts and better than pure ILs. Such absorbents can be regenerated through temperature and pressure swing without remarkable activity loss. This work shows that alkylimidazolium thiocyanate ILs with Cu+ salts are promising reactive absorbents to separate propylene from propane.

Catalysts are substances that increase the reaction rate of a chemical reaction without being consumed in the process. A catalyst, does not appear in the overall stoichiometry of the reaction it catalyzes. you can also check out more blogs about Electric Literature of 15804-19-0!, Quality Control of Cuprous thiocyanate

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

Application of 1111-67-7, Chemistry is a science major with cience and engineering. The main research on the structure and performance of functional materials.Mentioned the application of 1111-67-7, Name is Cuprous thiocyanate.

Copper(I) thiocyanate coordination polymers with dimethylpyrazine: Synthesis, crystal structures, thermal and luminescence properties

The new copper(I) coordination polymers polyl(di-mu 2-thiocyanato-N,S)-(mu2-2,5-dimethylpyrazine-N,N)] dicopper(I) (I) and poly[di-mu2-thiocyanato-N,S)-(mu 2-2,3-dimethyl-pyrazine-N,N)] dicopper(I) (II) were prepared by the reaction of copper(I) thiocyanate with 2,3- and 2,5-dimethylpyrazine in acetonitrile. In all compounds different CuSCN sub-structures are found which are connected by the dimethylpyrazine ligands to multi-dimensional coordination networks. The thermal properties of all compounds were investigated using simultaneous differential thermoanalysis (DTA), thermogravimetry (TG) and mass spectrometry (MS) as well as temperature resolved X-ray powder diffraction, On heating, compound I and II loose all of the dimethylpyrazine ligands in an endothermic reaction and transform directly into copper(I) thiocyanate. Optical investigations show two excited states for both compounds in absorption and in luminescence measurements which are both, MC and LMCT in character.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 1111-67-7, and how the biochemistry of the body works.Application of 1111-67-7

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”