Category: 1111-67-7

Related Products of 1111-67-7, As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world. In an article, once mentioned the application of Related Products of 1111-67-7, Name is Cuprous thiocyanate,molecular formula is CCuNS, is a conventional compound. this article was the specific content is as follows.

The authors present a novel compound [Cu(Pcba)2]n synthesized from the reaction between copper(I) thiocyanate and the ligand Pcba (Pcba = 2-pyrazine carboxylic acid), which exhibits a one-dimensional structure and has been characterized by Xray crystallography. In the process of synthesis, copper(I) ion has been oxidized into copper(II). This compound crystallizes in monoclinic, space group P2 (1)/c with cell parameters of a = 5.0387(4) A, b = 15.3317(13) A, c = 7.0720(6) A, beta = 106.63(0). The central ion Cu(II) is six-coordinated in a typical hexahedral geometry by four oxygen atoms and two nitrogen atoms in Pcba. Except chelating with two Pcbas, each central ion Cu(II) is extended to form one-dimensional linear structure through Pcba as the bridge. This compound was further characterized with IR spectra, fluorescence properties, UV-vis properties, and thermal analysis. Copyright Taylor & Francis Group, LLC 2013.

A reaction mechanism is the microscopic path by which reactants are transformed into products. Each step is an elementary reaction. In my other articles, you can also check out more blogs about 1111-67-7

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, causing turnover rates to depend strongly on interfacial structure and composition, COA of Formula: CCuNS, Name is Cuprous thiocyanate, belongs to copper-catalyst compound, is a common compound. COA of Formula: CCuNSIn an article, authors is Heller, Maik, once mentioned the new application about COA of Formula: CCuNS.

Treatment of an acetonitrile solution of CuCN with methylcycloarsoxane (CH3AsO)n at 110C affords the coordination polymer ?3[CuCN{cyclo-(CH3AsO)4}] (1), in which infinite CuCN zigzag chains are linked by mu-As1,As 3 cyclotetramers (CH3AsO)4 into an open 3-D framework. Under similar solvothermal conditions, reaction of CuSCN with (CH3AsO)n in the presence of KSCN leads to metal-mediated ring expansion of the cycloarsoxane to yield the complex ? 1[{K[cyclo-(CH3AsO)5]2}Cu(NCS) 2] (2). This contains discrete [Cu(NCS-kappaN)2{cyclo- (CH3AsO)5kappaAs}2]- anions that bridge kappa10O coordinated potassium cations into infinite chains. In contrast, the structure directing role of the [K(1,7DT18C6) 2]+ sandwich building units for the solvothermal product ?3[{K(1,7DT18C6)2}Cu6(CN) 7] (3) (1,7DT18C6 = 1,7-dithia-18-crown-6) leads to formation of an open ?3[{Cu6(CN)7} -] framework. Individual [K(1,7DT18C6)2]+ moieties bridge Cu Atoms in a mu-S1,S7 mode and are encapsulated within the large [Cu26(CN)28]2- cages of the cyanocuprate(I) network.

Catalysts are substances that increase the reaction rate of a chemical reaction without being consumed in the process. A catalyst, does not appear in the overall stoichiometry of the reaction it catalyzes. you can also check out more blogs about Reference of 288-14-2!, COA of Formula: CCuNS

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Reactions catalyzed within inorganic and organic materials and at electrochemical interfaces commonly occur at high coverage and in condensed media, causing turnover rates to depend strongly on interfacial structure and composition, Quality Control of Cuprous thiocyanate, Name is Cuprous thiocyanate, belongs to copper-catalyst compound, is a common compound. Quality Control of Cuprous thiocyanateIn an article, authors is Teske, Christoph L., once mentioned the new application about Quality Control of Cuprous thiocyanate.

The title compounds NH4[Cu(S2CNH2) 2]·H2O (A) and CuS2CNH2 (B) were prepared from aqueous alcoholic solutions by reaction of ammoniumdithiocarbamate with copper sulfate in presence of excess cyanide as reductive. (A) crystallizes in the orthorhombic space group C2221 (No. 20) with a = 8.9518(6), b = 9.6414(6) and c = 10.6176(8) A, Z = 4. (B) crystallizes in the orthorhombic space group P212 121 (No. 19) with a = 5.9533(4), b = 6.6276(4) and c = 9.4834(5) A, Z = 4. In the crystal structure of (A) copper has a tetrahedral surrounding of four monodentate dithiocarbamate ligands. These structural units form 2D nets stacked along [001]. Staggered chains consisting of H2O and NH4+ penetrate the crystal structure along [001] yielding additional coherence via hydrogen bonds. The crystal structure of (B) comprises a three-dimensional tetrahedral framework of CuS 4 units exclusively linked by vertices. The arrangement is reminiscent of a filled beta-cristobalite structure with the dithiocarbamate ligands extending into the hollow spaces. Thermal decomposition precedes stepwise finally giving Cu2S in each case.

Enzymes are biological catalysts that produce large increases in reaction rates and tend to be specific for certain reactants and products. I hope my blog about 1111-67-7 is helpful to your research.

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Electric Literature of 1111-67-7, Chemistry is a science major with cience and engineering. The main research on the structure and performance of functional materials.Mentioned the application of 1111-67-7, Name is Cuprous thiocyanate.

A copper-catalyzed C(sp3)-Si cross-coupling of aliphatic C(sp3)-I electrophiles using a Si-B reagent as the silicon pronucleophile is reported. The reaction involves an alkyl radical intermediate that also engages in 5-exo-trig ring closures onto pendant alkenes prior to the terminating C(sp3)-Si bond formation. Several Ueno-Stork-type precursors cyclized with excellent diastereocontrol in good yields. The base-mediated release of the silicon nucleophile and the copper-catalyzed radical process are analyzed by quantum-chemical calculations, leading to a full mechanistic picture.

One of the oldest and most widely used commercial enzyme inhibitors is aspirin, Electric Literature of 1111-67-7, which selectively inhibits one of the enzymes involved in the synthesis of molecules that trigger inflammation. you can also check out more blogs about 1111-67-7

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. Formula: CCuNS. Introducing a new discovery about 1111-67-7, Name is Cuprous thiocyanate

In order to systematically explore the photocatalytic activity of the inorganic-organic supramolecular polymers induced by 1,1?-(1,n-alkylidene)bis[4-methylpyridinium] (n = 1-2) cations, two novel cation-induced compounds, {(bmpm) [Cu2(SCN)4]}n (bmpm = 1,1?-methylenebis[4-methylpyridinium] (1) and {(bmpe) [Cu2(SCN)4]}n (bmpe = 1,1?-(1,2-ethanediyl)bis[4-methylpyridinium] (2) were obtained and characterized by X-ray crystallography. Compound 1 has a 3D framework with the cations trapped within host network cavities. Compound 2 possesses an infinite 2D supramolecular polypseudorotaxane structure linked by bridging thiocyanate groups. The third-order NLO, optical band gaps and photocatalytic activities of 1 and 2 were also evaluated. Remarkably, both 1 and 2 exhibited good photocatalytic abilities.

Catalysts are substances that increase the reaction rate of a chemical reaction without being consumed in the process. A catalyst, does not appear in the overall stoichiometry of the reaction it catalyzes. you can also check out more blogs about Application of 2682-49-7!, Formula: CCuNS

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Synthetic Route of 1111-67-7, In homogeneous catalysis, catalysts are in the same phase as the reactants. Enzymes are biological catalysts that produce large increases in reaction rates and tend to be specific for certain reactants and products.In an article,authors is Karuthedath, Safakath, once mentioned the application of Synthetic Route of 1111-67-7, Name is Cuprous thiocyanate, is a conventional compound.

Organic solar cells that use only fullerenes as the photoactive material exhibit poor exciton-to-charge conversion efficiencies, resulting in low internal quantum efficiencies (IQE). However, the IQE can be greatly improved, when copper(I) thiocyanate (CuSCN) is used as a carrier-selective interlayer between the phenyl-C70-butyric acid methyl ester (PC70BM) layer and the anode. Efficiencies of ?5.4% have recently been reported for optimized CuSCN:PC70BM (1:3)-mesostructured heterojunctions, yet the reasons causing the efficiency boost remain unclear. Here, transient absorption (TA) spectroscopy is used to demonstrate that CuSCN does not only act as a carrier-selective electrode layer, but also facilitates fullerene exciton dissociation and hole transfer at the interface with PC70BM. While intrinsic charge generation in neat PC70BM films proceeds with low yield, hybrid films exhibit much improved exciton dissociation due to the presence of abundant interfaces. Triplet generation with a rate proportional to the product of singlet and charge concentrations is observed in neat PC70BM films, implying a charge?singlet spin exchange mechanism, while in hybrid films, this mechanism is absent and triplet formation is a consequence of nongeminate recombination of free charges. At low carrier concentrations, the fraction of charges outweighs the population of triplets, leading to respectable device efficiencies under one sun illumination.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 1111-67-7, and how the biochemistry of the body works.Synthetic Route of 1111-67-7

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 1111-67-7, Name is Cuprous thiocyanate, belongs to copper-catalyst compound, is a common compound. name: Cuprous thiocyanateIn an article, once mentioned the new application about 1111-67-7.

The reaction of Me3SiC<*>CSiMe3 (1), LnMC<*>CSiMe3 (4a, LnM = Cp(CO)2Fe; 4b, LnM = Cp(CO)3Mo> and E(C<*>CR)2 (6, E = Me2Si; 8, E = (eta5-C5H4SiMe3)2Ti; R is a singly bonded organic ligand) with CuX (2) (X is a halide or pseudohalide) is described. 1 and 4 react with CuX (2a, X = Cl; 2b X = Br; 2c, X = I; 2d, X = OSO2CF3) to yield the dimeric compounds <(eta2-Me3SiC<*>CSiMe3)CuX>2 (3a, X = Cl; 3b, X = Br; 3c, X = I; 3d, X = OSO2CF3) or <(eta2-LnMC<*>CSiMe3)CuX>2 (5a, LnM = Cp(CO)2Fe, X = Cl; 5b, LnM = Cp(CO)3Mo, X = Cl) respectively.In these compounds the C2 building block is eta2-coordinated to a CuX moiety and by the formation of copper-X-bridges (Cu2X2) a dimer is formed.However, the reaction of Me2Si(C<*>CSiMe3)(C<*>CR) (6a, R = SiMe3; 6b, R = H) with CuX (2) (X = Cl, Br, OSO2CF3, O2CMe) affords polymeric CSiMe3)(eta2-C<*>CR)Cu2X2>>n (7a, R = SiMe3, X = Cl; 7b, R = SiMe3, X = Br; 7c, R = H, X = Cl; 7d, R = H, X = Br; 7e, R = SiMe3, X = OSO2CF3; 7f, R = SiMe3, X = O2CMe) in high yields.In 7a-7f each alkynyl fragment is eta2-coordinated to a CuX unit.While the reaction of 6a or 6b with CuX yields polymeric 7a-7f, the organometallic, 1,4-diyne RC<*>C--C<*>CR ( = (eta5-C5H4SiMe3)2Ti; 8a, R = Ph; 8b, R = SiMe3) affords with CuX (2a, X = Cl; 2b, X = Br; 2c, X = I; 2e, X = CN; 2f, X = SCN) the dinuclear compounds <(eta5-C5H4SiMe3)2Ti(C<*>CR)2>CuX (9a, R = Ph, X = Cl; 9b, R = SiMe3, X = Cl; 9c, R = SiMe3, X = Br; 9d, R = SiMe3, X = I; 9e, R = SiMe3, X = CN; 9f, R = SiMe3, X = SCN).Compounds 9a-9f feature a monomeric copper(I) halide or copper(I) pseudohalidemoiety, which is stabilized by the chelating effect of the alkynyl ligands on (C<*>CR)2. <(eta5-C5H4SiMe3)2Ti(C<*>CSiMe3)2>CuCl (9b) reacts with AgX (X = CN, SCN, O2CMe, O2CPh) to yield <(eta5-C5H4SiMe3)2Ti(C<*>CSiMe3)2>CuX (9e, X = CN; 9f, X = SCN; 9g, X = OC(O)Me; 9h, X = OC(O)Ph) by precipitation of AgCl.In addition, the bis(alkynyl)-ansa-titanocene <(eta5-C5H4)Me2Si(eta5-C5H3SiMe3)>Ti(C<*>CSiMe3)2 (10) yields with CuCl (2a) the dinuclear species <Ti(C<*>CSiMe3)2>CuCl (11).The identity of compounds 3, 5, 7, 9 and 11 is confirmed by analytical and spectroscopic (IR, MS, 1H, 13C NMR) data, and that of <(eta5-C5H4SiMe3)2Ti(C<*>CPh)2>CuCl (9a) is confirmed by X-ray analysis.Crystals of 9a are monoclinic, space group Pc with cell constant a = 992.6(7), b = 1210(1), c = 1335.5(7) pm, beta = 105.75(5) deg, V = 1543(2)x106 pm3 and Z = 2.Keywords: Alkynes, 1,4-Diynes; Copper(I) halides; Copper(I) pseudohalides

The reactant in an enzyme-catalyzed reaction is called a substrate. Enzyme inhibitors cause a decrease in the reaction rate of an enzyme-catalyzed reaction.I hope my blog about 1111-67-7 is helpful to your research.

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 1111-67-7, Name is Cuprous thiocyanate, belongs to copper-catalyst compound, is a common compound. Application In Synthesis of Cuprous thiocyanateIn an article, once mentioned the new application about 1111-67-7.

Treatment of olefins with a mixture of iodine and mercury(II) thiocyanate in benzene or diethyl ether gives vic-iodo(isothiocyanato)alkanes and vic-iodo(thiocyanato)alkanes in a high yield, the former being predominant. Similar results were obtained by using silver(I) and thallium(I) thiocyanates, though both the yield and the selectivity are slightly lower. By use of potassium thiocyanate and copper(I) isothiocyanate in place of mercury(II) thiocyanate, beta -iodo thiocyanates were mainly formed. A reaction scheme involving initial formation of an iodonium ion from olefin and ISCN (formed in situ) and a subsequent attack of complex anion I(SCN)//2** minus has been proposed to account for this predominant formation of beta -iodo isothiocyanates.

Catalysts are substances that increase the reaction rate of a chemical reaction without being consumed in the process. A catalyst, does not appear in the overall stoichiometry of the reaction it catalyzes. you can also check out more blogs about Formula: C3H3NO!, Application In Synthesis of Cuprous thiocyanate

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Synthetic Route of 1111-67-7, Chemistry is a science major with cience and engineering. The main research on the structure and performance of functional materials.Mentioned the application of 1111-67-7, Name is Cuprous thiocyanate.

This paper reports the development of an analytical method employing vortex-assisted matrix solid-phase dispersion (MSPD) for the extraction of diuron, Irgarol 1051, TCMTB (2-thiocyanomethylthiobenzothiazole), DCOIT (4,5-dichloro-2-n-octyl-3-(2H)-isothiazolin-3-one), and dichlofluanid from sediment samples. Separation and determination were performed by liquid chromatography tandem-mass spectrometry. Important MSPD parameters, such as sample mass, mass of C18, and type and volume of extraction solvent, were investigated by response surface methodology. Quantitative recoveries were obtained with 2.0 g of sediment sample, 0.25 g of C18 as the solid support, and 10 mL of methanol as the extraction solvent. The MSPD method was suitable for the extraction and determination of antifouling biocides in sediment samples, with recoveries between 61 and 103% and a relative standard deviation lower than 19%. Limits of quantification between 0.5 and 5 ng g?1 were obtained. Vortex-assisted MPSD was shown to be fast and easy to use, with the advantages of low cost and reduced solvent consumption compared to the commonly employed techniques for the extraction of booster biocides from sediment samples. Finally, the developed method was applied to real samples. Results revealed that the developed extraction method is effective and simple, thus allowing the determination of biocides in sediment samples.

Interested yet? Keep reading other articles of Synthetic Route of 36216-80-5!, Synthetic Route of 1111-67-7

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Chemo-enzymatic cascade processes are invaluable due to their ability to rapidly construct high-value products from available feedstock chemicals in a one-pot relay manner. Formula: CCuNS, Name is Cuprous thiocyanate, Formula: CCuNS, molecular formula is CCuNS. In a article，once mentioned of Formula: CCuNS

Cuprous thiocyanate (p-type semiconductor) is found to adsorb thiocyanated cationic dyes to yield high photo-responses in aqueous KCNS. The method of preparation and the performance of dye-sensitized CuCNS photocathodes are discussed.

The reactant in an enzyme-catalyzed reaction is called a substrate. Enzyme inhibitors cause a decrease in the reaction rate of an enzyme-catalyzed reaction.I hope my blog about 1111-67-7 is helpful to your research.

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”