Category: 1111-67-7

The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 1111-67-7, Name is Cuprous thiocyanate, belongs to copper-catalyst compound, is a common compound. name: Cuprous thiocyanateIn an article, once mentioned the new application about 1111-67-7.

In this present work we report a numerical modeling of methylammonium germanium tri-iodide-based perovskite solar cells using 1D-SCAPS simulation program. To enhance the device performances, improvement of the device structure and both electron transport and hole transport materials is the effective way. Accordingly, this study is mainly focused on exploring of potentially high-stable hole transport materials (HTMs). Diverse HTMs were suggested, including organic and inorganic materials, and investigated to enhance the reproducibility and stability of CH3NH3GeI3-based perovskite solar cells. Among the proposed materials, copper antimony sulfide (CuSbS2) is the most suitable HTM. Hence, employing CuSbS2 as HTM in perovskite solar cell, the power conversion efficiency is significantly enhanced, and its value achieving 23.58%. Therefore, the obtained results make CuSbS2 an excellent candidate for improving the performance of Ge-perovskite solar cells.

Enzymes are biological catalysts that produce large increases in reaction rates and tend to be specific for certain reactants and products. I hope my blog about 1111-67-7 is helpful to your research.

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Synthetic Route of 1111-67-7, Catalysts function by providing an alternate reaction mechanism that has a lower activation energy than would be found in the absence of the catalyst. In some cases, the catalyzed mechanism may include additional steps. In an article, authors is Mandal, Tarak Nath, once mentioned the application of Synthetic Route of 1111-67-7, Name is Cuprous thiocyanate,molecular formula is CCuNS, is a conventional compound.

Reaction of 2 equiv. amount of copper(II) chloride dihydrate with 2 equiv. of methyl-5-methyl-1-(4,6-dimethyl-2-pyrimidyl)pyrazole-3-carboxylate (DpymPzC) in presence of 1 equiv. of 2-mercapto-4,6-dimethylpyrimidine (DpymtH) at pH ? 6 afforded the tricoordinated copper(I) complex [Cu(DpymPzC)Cl] (1). The same reaction with copper(II) perchlorate hexahydrate, as the metal salt under the same equivalent ratio at pH ? 6 formed the tetracoordinated copper(I) complex [Cu(DpymPzC)2]ClO4 (2). In both the cases, the role of DpymtH is nothing but only to reduce the copper(II) salt in situ finally forming the copper(I) complex. On the other hand, the direct reaction between the copper(I) thiocyanate and DpymPzC in 2:2 equiv. ratio produced a tricoordinated copper(I) complex [Cu(DpymPzC)SCN] (3). In a similar reaction of 2 equiv. amount of copper(II) chloride dihydrate with 2 equiv. amount of ethyl-5-methyl-1-(2-pyridyl)pyrazole-3-carboxylate (PyPzC) in presence of 1 equiv. of DpymtH at pH ? 6, an intense red coloured microcrystalline compound (4) was obtained. In contrast, 1 equiv. of PyPzC and 2 equiv. of DpymtH on reaction with 1 equiv. of copper(II) chloride dihydrate at pH ? 6 produced a novel tetranuclear mixed coordinated [Cu4(DpymtH)4Cl4] complex (5). Here DpymtH plays dual role – a reducing agent for the copper(II) salt followed by a chelating ligand towards copper(I) so formed in situ. Among the above species, 1, 2 and 5 are crystallographically characterized. In 1, the central copper atom is in distorted triangular planar geometry with N2Cl chromophore whereas in 2, the same is in distorted tetrahedral geometry with N4 chromophore. Notably, the extent of distortion from the ideal geometry is more in 2. In 5, which is in chair conformation, out of four copper atoms, two being in S2Cl chromophore are tricoordinated and the remaining two are tetracoordinated with NS2Cl chromophore. The metal centers are bridged through DpymtH in its ‘thione’ form. Interestingly, the chelation (in part) results in formation of the highly stable four-membered two chelate rings around the two tetracoordinated copper atoms in 5. The two copper centers along the long arm of the chair are separated through a distance of 5.190 A while those in the short arm are at a length of 3.629 A. The electronic, IR spectra and electrochemistry of the complexes 1, 2 and 5 have also been investigated.

The proportionality constant is the rate constant for the particular unimolecular reaction. the reaction rate is directly proportional to the concentration of the reactant. I hope my blog about 1111-67-7 is helpful to your research. Synthetic Route of 1111-67-7

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 1111-67-7, Name is Cuprous thiocyanate, belongs to copper-catalyst compound, is a common compound. Computed Properties of CCuNSIn an article, once mentioned the new application about 1111-67-7.

CuI-based coordination polymers with 1,2-ethanedithiol, 3,6-dioxa-1,8-octanedithiol and 3-oxa-1,5-pentanedinitrile as respectively mu-S,S? and mu-N,N? bridging ligands have been prepared by reaction of CuI with the appropriate alkane derivative in acetonitrile. ?2[Cu(HSCH2CH2SH) 2]I (1) contains 44 cationic nets, ? 2[(CuI)2(HSCH2CH2OCH 2CH2OCH2CH2SH)] (2) neutral layers in which stairlike CuI double chains are linked by dithiol spacers. In contrast to these 2D polymers, ?1[CuI(NCCH2CH 2OCH2-CH2CN)] (3) and ? 1[(CuI)4(NCCH2CH2OCH 2CH2CN)2] (4) both contain infinite chains with respectively (CuI)2 rings and distorted (CuI)4 cubes as building units. Solvothermal reaction of CuI with the thiacrown ether 1,4,10-trithia-15-crown-5 (1,4,10TT15C5) in acetonitrile affords the lamellar coordination polymer ?2[(CuI)3(1,4, 10TT15C5)] (7) in which copper atoms of individual CuI double chains are bridged in a mu-S1,S4 manner. The third sulphur atom S10 of the thiacrown ether coordinates a copper(I) atom from a parallel chain to generate a 2D network.

Interested yet? Keep reading other articles of Related Products of 2412-58-0!, Computed Properties of CCuNS

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Synthetic Route of 1111-67-7, In heterogeneous catalysis, catalysts provide a surface to which reactants bind in a process of adsorption. Enzyme inhibitors cause a decrease in the reaction rate of an enzyme-catalyzed reaction.In an article, once mentioned the application of 1111-67-7, Name is Cuprous thiocyanate, is a conventional compound.

Three Cu-based coordination polymers (CPs), including [Cu II(N- eta 1-NCS) 2(O- eta 1-DMF) 2(mu 2-3,3′-bptz)] n (1), [Cu I(1,3- mu 2-NCS)(mu 2-3,3′-bptz)] n (2) and [(Cu I(1,3- mu 2- NCS))(mu 2-4,4′-bptz)] n (3) (DMF = N, N-dimethyl formamide, 3,3′-bptz = 3,6-bis(3-pyridyl)tetrazine and 4,4′-bptz = 3,6-bis(4-pyridyl)tetrazine) have been successfully constructed by solution diffusion reactions by using Cu(NO 3) 2.3H 2O or CuNCS and KNCS with 3,3′-bptz / 4,4′-bptz ligands, respectively. The resulting crystalline materials have been characterized by the single-crystal X-ray diffraction analyses, elemental analyses, FT-IR spectra, thermogravimetric analyses and powder X-ray diffraction (PXRD). Single crystal X-ray analyses revealed that CP 1 is organized in one-dimensional (1D) chain in which the Cu(II) ions are coordinated by eta 1-NCS – anions and eta 1-DMF molecules, and linked by mu 2-3,3′-bptz bridging ligands. CPs 2 and 3 are structural isomers. CP 2 exhibits two-dimensional (2D) (4,4)-plane-like network in which Cu(I) ions are linked by mu 2-NCS – and mu 2-3,3′-bptz ligands. In CP 3, Cu(I) ions are connected by mu 2-NCS – and mu 2-4,4′-bptz ligands to form 2D saw-tooth wavy network. In addition, the photoluminescence properties of CPs 1-3 were also investigated in the solid state at room temperature.

Interested yet? Keep reading other articles of 64068-00-4!, Synthetic Route of 1111-67-7

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Synthetic Route of 1111-67-7, Catalysts function by providing an alternate reaction mechanism that has a lower activation energy than would be found in the absence of the catalyst. In some cases, the catalyzed mechanism may include additional steps. In an article, authors is Nair, Vasu, once mentioned the application of Synthetic Route of 1111-67-7, Name is Cuprous thiocyanate,molecular formula is CCuNS, is a conventional compound.

The regiospecific functionalization of the base moiety of purine nucleosides through copper-mediated nucleophilic reactions is described.

But sometimes, even after several years of basic chemistry education, it is not easy to form a clear picture on how they govern reactivity! Read on for other articles about Safety of (Tetrahydrofuran-3-yl)methanol!, Synthetic Route of 1111-67-7

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Synthetic Route of 1111-67-7, In heterogeneous catalysis, catalysts provide a surface to which reactants bind in a process of adsorption. Enzyme inhibitors cause a decrease in the reaction rate of an enzyme-catalyzed reaction.In an article, once mentioned the application of 1111-67-7, Name is Cuprous thiocyanate, is a conventional compound.

Reaction of copper(II) thiocyanate with pyrimidine leads to the formation of the new ligand-rich 1:2 (1:2 = ratio metal salt to ligand) copper(II) compound [Cu(NCS)2(pyrimidine)2]n (1). Its crystal structure was determined by X-ray single crystal investigations. It consists of linear polymeric chains, in which the Cu2+ cations are mu-1,3 bridged by the thiocyanato anions. The pyrimidine ligands are terminal N-bonded to the Cu2+ cations, which are overall octahedrally coordinated by two pyrimidine ligands and two N-bonded as well as two S-bonded thiocyanato anions. Magnetic measurements were preformed yielding weak net ferromagnetic interactions between adjacent Cu2+ centers mediated by the long Cu-S distances and/or interchain effects. On heating compound 1 to approx. 160 C, two thirds of the ligands are discharged, leading to a new intermediate compound, which was identified as the ligand-deficient 2:1 copper(I) compound [(CuNCS)2(pyrimidine)]n by X-ray powder diffraction. Consequently, copper(II) was reduced in situ to copper(I) on heating, forming polythiocyanogen as byproduct. Elemental analysis and infrared spectroscopic investigations confirm this reaction pathway. Further investigations on other ligand-rich copper(II) thiocyanato compounds clearly show that this in situ thermal solid state reduction works in general. The Royal Society of Chemistry 2009.

Do you like my blog? If you like, you can also browse other articles about this kind. Thanks for taking the time to read the blog about 1111-67-7

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Synthetic Route of 1111-67-7, In heterogeneous catalysis, catalysts provide a surface to which reactants bind in a process of adsorption. Enzyme inhibitors cause a decrease in the reaction rate of an enzyme-catalyzed reaction.In an article, once mentioned the application of 1111-67-7, Name is Cuprous thiocyanate, is a conventional compound.

Cobalt(II) complexes of the type Co[Cu(NCS)2]2 ? L, where L is acetophenonebenzoylhydrazone (Abh), acetophenoneisonicotinoylhydrazone (Ainh), acetophenonesalicyloylhydrazone (Ash), acetophenoneanthraniloylhydrazone (Aah), p- hydroxyacetophenonebenzoylhydrazone (Phabh), p- hydroxyacetophenoneisonicotinoylhydrazone (Phainh), p- hydroxyacetophenonesalicyloylhydrazone (Phash), and p- hydroxyacetophenoneanthraniloylhydrazone (Phaah) were synthesized and characterized by elemental analyses, molar conductance, magnetic moments, electronic and IR spectra, and X-ray diffraction studies. The complexes are insoluble in common organic solvents and are non-electrolytes. These complexes are coordinated through the >C=O and >C=N groups of the hydrazone ligands. The magnetic moments and electronic spectra suggest a spin-free octahedral geometry around Co(II). The X-ray diffraction parameters (a, b, c) for Co[Cu(SCN)2]2 ? Ainh and Co[Cu(SCN)2] 2 ? Phabh correspond to orthorhombic and tetragonal crystal lattices, respectively. The complexes show a fair antifungal and antibacterial activity against a number of fungi and bacteria. The activity increases with increasing concentration of the compounds.

Synthetic Route of 1111-67-7, If you are hungry for even more, make sure to check my other article about Synthetic Route of 1111-67-7

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

In classical electrochemical theory, both the electron transfer rate and the adsorption of reactants at the electrode control the electrochemical reaction. category: copper-catalyst. Introducing a new discovery about 1111-67-7, Name is Cuprous thiocyanate

The title compounds [MS4Cu4(SCN)2(NC5H5) 6] (M=W (1); M=Mo (2); NC5H5=pyridine) were obtained by the reaction of (NH4)2MS4, CuSCN, KSCN and pyridine. The X-ray analyses of 1 and 2 show that four edges of the tetrahedral MS42- core are coordinated by four copper atoms, giving an MS4Cu4 aggregate of approximate D2h symmetry. The nonlinear optical properties of 1 and 2 were investigated by a Z-scan technique with 7 ns laser pulses of 532 nm. The third-order nonlinearities were determined with alpha2=4.3×10-5 and 4.1×10-5 cm W-1 M-1; and n2=-4.3×10-10 and -4.1×10-10 cm2 W-1 M-1, respectively, for compounds 1 and 2.

The reactant in an enzyme-catalyzed reaction is called a substrate. Enzyme inhibitors cause a decrease in the reaction rate of an enzyme-catalyzed reaction.I hope my blog about 1111-67-7 is helpful to your research.

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

The transformation of simple hydrocarbons into more complex and valuable products via catalytic C–H bond functionalisation has revolutionised modern synthetic chemistry. 1111-67-7, Name is Cuprous thiocyanate, belongs to copper-catalyst compound, is a common compound. Computed Properties of CCuNSIn an article, once mentioned the new application about 1111-67-7.

Copper sulphide materials have received great attention due to their low bandgap semiconducting properties. As compared to other chalcogenides, few synthetic examples have been reported, and a simple and scalable synthetic method for preparing size- and shape-controlled copper sulphide nanoparticles is required for potential wide application of these materials. Herein, a facile one pot scalable synthetic route has been developed for preparing highly monodisperse djurleite Cu1.94S hexagonal nanoplates. The thermal decomposition of a single precursor CuSCN was found suitable for preparing a large quantity of highly monodisperse Cu1.94S hexagonal nanoplates; a multi-gram scale product could be obtained in a single step. Under the synthetic scheme developed, the width of Cu1.94S nanoplates with a thickness of ~ 10 nm could be easily tuned from 70 nm to 130 nm. Their optical properties were investigated and their photothermal effect was also studied by photothermal optical coherence reflectometry (PT OCR). Cu1.94S hexagonal nanoplates showed a considerable photothermal effect, which was found to depend on the nanoparticle concentration.

Enzymes are biological catalysts that produce large increases in reaction rates and tend to be specific for certain reactants and products. I hope my blog about 1111-67-7 is helpful to your research.

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Application of 1111-67-7, In homogeneous catalysis, catalysts are in the same phase as the reactants. Enzymes are biological catalysts that produce large increases in reaction rates and tend to be specific for certain reactants and products.In an article,authors is Davidson, Ross J., once mentioned the application of Application of 1111-67-7, Name is Cuprous thiocyanate, is a conventional compound.

Tris(2-cyanoethyl)phosphine (tcep) reacts with the copper(I) compounds, CuX (X = Cl, Br, I and SCN), in a 1:1 ratio to give 1:1 complexes, CuX(tcep), whereas it reacts with CuY (Y = PF6, ClO4, NO3, BH4, CN and CF3COO) in a 2:1 ratio to give the 2:1 complexes, CuY(tcep)2. Single crystal X-ray structures show that for the anions X = Br and SCN, the complexes are coordination polymers, [CuX(tcep)]n, with the Cu centres being bridged by the anion, and as well, one nitrile arm per tcep ligand coordinates intermolecularly to the Cu to give tetrahedral ‘PBr2N’ and ‘PSN2’ coordination spheres respectively. The 2:1 compounds exhibit a variety of structures. For Y = ClO4, CN and CF3COO polymeric structures are formed except for Y = BH4 where the compound is a discrete monomer, [Cu(BH 4)(tcep)2], with a chelating anion and two monodentate P-bound tcep ligands. Both the compounds obtained with Y = CN and CF 3COO also contain coordinated anions and are formulated as [Cu(CN)(tcep)2]n and [Cu(CF3COO)(tcep) 2]n respectively. In the case of Y = CN the anion is bridging and the tcep ligands are only P-bound giving a ‘P2NC’ coordination sphere. In contrast, for Y = CF3COO, the anion is an O-bound monodentate and the tcep ligands bridge to give a ‘P2NO’ environment for the copper. In the case of Y = ClO4, the anion is not coordinated but a polymeric structure, [Cu(tcep)2] n(ClO4)n, is formed via bridging tcep ligands linking Cu centres intermolecularly resulting in a ‘P2N2’ coordination sphere.

We’ll also look at important developments in the pharmaceutical industry because understanding organic chemistry is important in understanding health, medicine, the role of 1111-67-7, and how the biochemistry of the body works.Application of 1111-67-7

Reference：
Copper catalysis in organic synthesis – NCBI,
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”