Category: copper-catalyst

Copper(II) trifluoromethanesulfonate, cas is 34946-82-2, it is a common heterocyclic compound, the copper-catalyst compound, its synthesis route is as follows.,34946-82-2

To a solution of 6.90 g (18.5 mmol) of 5′-bromo-3′-nitro-3,4,5,6-tetrahydro-2H- [l,2′]bipyridinyl-4-yl)-acetic acid in dimethylsulfoxide (100 mL) is added 4.5 mL (41 mmol) of dimethylethylenediamine followed by 4.0 g (39 mmol) of sodiummethanesulfinate and 5.5 g (19 mmol) of copper (II) triflate. The mixture is heated to 130 C for lhour then cooled to room temperature. The mixture is diluted with water and stirred overnight during which time a solid precipitates from solution. The yellow solid is collected by filtration, washed with water and dried on the filter pad to provide 5.00 g (72.6%) of (5′-methanesulfonyl-3′-nitro-3,4,5,6-tetrahydro-2H-[l,2′]bipyridinyl-4-yl)- acetic acid ethyl ester.

34946-82-2 is used more and more widely, we look forward to future research findings about Copper(II) trifluoromethanesulfonate

Reference£º
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; GINN, John David; SORCEK, Ronald John; TURNER, Michael Robert; WU, Di; WU, Frank; WO2011/84985; (2011); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.7787-70-4, Copper(I) bromide it is a common compound, a new synthetic route is introduced below.7787-70-4

A mixture of CuBr (28.7mg, 0.2mmol) and dppp (82.5mg, 0.2mmol) with an excess of batho (66.5mg, 0.2mmol) were dissolved in CH2Cl2 (5mL) and CH3OH (5mL) solution, stirred at room temperature for 6h. The insoluble residues were removed by filtration, and the filtrate was evaporated slowly at room temperature to yield yellow crystalline products. Yield: 80%. Anal. Calc. for C53H50BrCuN2O2P2: C, 66.84; H, 5.29; N, 2.94. Found: C, 66.97; H, 5.15; N, 2.88%. IR (KBr disc, cm-1): 3378s, 3048w, 2858w, 2580w, 1616w, 1556m, 1515m, 1433s, 1414m, 1229m, 1026s, 998w, 767m, 740s, 698vs, 513s, 482m. 1H NMR (600MHz, CDCl3, 298K): delta 7.87-8.98 (d, 6H, batho CH), 7.56-7.68 (m, 10H, batho CH), 7.41-7.24 (m, 20H, dppp CH), 2.91-2.81 (m, 4H, CH2), 2.78-2.63 (m, 2H, CH2); 31P NMR (400MHz, CDCl3, 298K): -12.25, -14.84.

With the complex challenges of chemical substances, we look forward to future research findings about Copper(I) bromide,belong copper-catalyst compound

Reference£º
Article; Yu, Xiao; Fan, Weiwei; Wang, Guo; Lin, Sen; Li, Zhongfeng; Liu, Min; Yang, Yuping; Xin, Xiulan; Jin, Qionghua; Polyhedron; vol. 157; (2019); p. 301 – 309;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.7787-70-4, Copper(I) bromide it is a common compound, a new synthetic route is introduced below.7787-70-4

A yellow solution of 168.0 mg (0.736 mmol) of 2b in toluene (10 mL) was added to a green CH3CN solution (20 mL) containing 105.6 mg (0.736 mmol) CuBr with stirring at ambient temperature. The reaction mixture was allowed to stir overnight forming a dark green precipitate. The solution was filtered, and the precipitate washed with cold MeOH (5 mL) and dried under vacuum (57.9 mg, 17% yield). 1H and 13C{1H} NMR spectra could not be recorded due to strong paramagnetic properties of complex. FTIR (KBr) 3425, 3056, 3006, 2918, 1627, 1593, 1466, 1436, 1300, 1269, 1236, 1201, 1157, 1106, 1092, 1069, 1046, 967, 958, 914, 849, 774, 767, 744, 694, 652, 567, 543, 501, 458, 417 cm-1. Anal. Calc’d. for C13H12Br2CuN2S: C = 34.57%, H = 2.68%, N = 6.20%. Found: C = 34.17%, H = 3.36%, N = 6.44%. UV-vis (DMF, 0.050 mg/mL) lambdamax (epsilon) = 266 (7.6 * 103), 353., 7787-70-4

The synthetic route of 7787-70-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Cross, Edward D.; Ang, M. Trisha C.; Richards, D. Douglas; Clemens, Amy C.; Muthukumar, Harshiny; McDonald, Robert; Woodfolk, London; Ckless, Karina; Bierenstiel, Matthias; Inorganica Chimica Acta; vol. 481; (2018); p. 69 – 78;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

34946-82-2, Copper(II) trifluoromethanesulfonate is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of 6.90 g (18.5 mmol) of 5′-bromo-3′-nitro-3,4,5,6-tetrahydro-2H- [l,2′]bipyridinyl-4-yl)-acetic acid in dimethylsulfoxide (100 mL) is added 4.5 mL (41 mmol) of dimethylethylenediamine followed by 4.0 g (39 mmol) of sodiummethanesulfinate and 5.5 g (19 mmol) of copper (II) triflate. The mixture is heated to 130 C for lhour then cooled to room temperature. The mixture is diluted with water and stirred overnight during which time a solid precipitates from solution. The yellow solid is collected by filtration, washed with water and dried on the filter pad to provide 5.00 g (72.6%) of (5′-methanesulfonyl-3′-nitro-3,4,5,6-tetrahydro-2H-[l,2′]bipyridinyl-4-yl)- acetic acid ethyl ester.

34946-82-2, 34946-82-2 Copper(II) trifluoromethanesulfonate 2734996, acopper-catalyst compound, is more and more widely used in various fields.

Reference£º
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; GINN, John David; SORCEK, Ronald John; TURNER, Michael Robert; WU, Di; WU, Frank; WO2011/84985; (2011); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7787-70-4, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route., 7787-70-4

Cuprous iodide (0.198 g, 1.04 mmol)Adding to a solution of 3,4-bis(diphenylphosphino)-2,5-dimethylthiophene (dpmt) (0.500 g, 1.04 mmol) synthesized in Example 1 in 30 mL of CH2Cl2,The mixture was stirred at room temperature for 5 h. Filter the reaction mixture,The solvent was removed under reduced pressure to give a pale yellow powder.The powder was dissolved in dichloromethane and recrystallized to give 0.615 g of yellow crystals.That is, the complex 1 was found to have a yield of 88.1%.

As the rapid development of chemical substances, we look forward to future research findings about 7787-70-4

Reference£º
Patent; Hubei University; Liu Li; Wei Qiong; (15 pag.)CN108997382; (2018); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

34946-82-2, Copper(II) trifluoromethanesulfonate is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

The ligand (75.9 mg, 0.12 mmol) was dissolved in THF (4 ml) and added to a suspension of sodium hydride (11.8 mg, 0.49 mmol) in THF (2 ml) at 0 C. The resulting yellow mixture was stirred at 0 C for 1 h and at r. t. for 2 h. Afterwards the solution was added dropwise to a solution of copper(II) triflate (44.3 mg, 0.12 mmol) in THF (2 ml). The dark brown solution was stirred at r. t. for 16 h. After filtration the solvent was removed in vacuo and the brown solid purified by recrystallisation from dichloromethane and pentane. 6: 60.8 mg, 60.9%. C41H36N5O5SF3Cu¡¤3CH2Cl2: Anal. Calc. C, 46.35; H, 4.24; N, 6.14. Found: C, 46.70; H, 4.12; N, 6.19%. HR-MS: C40H36N5O2Cu Calc. 681.2159. Found: 681.2148 (100.0), IR: nunu [cm-1]=3060, 2929, 2855, 1640, 1592, 1530, 1444, 1262, 1174, 1097, 1044, 879, 646., 34946-82-2

The synthetic route of 34946-82-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Sauer, Desiree C.; Wadepohl, Hubert; Polyhedron; vol. 81; (2014); p. 180 – 187;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

578743-87-0, [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,578743-87-0

In a dry double-mouth bottle to place Ir – 1 (0.0695 g, 0.1 mmol), CuClNHC (0.0488 g, 0.1 mmol), vacuum pumping and nitrogen cycle three times, then the nitrogen flow by adding 10 ml ethanol, stirring reflux reaction for 4 hours, cooling to room temperature, then added potassium hexafluorophosphate (0.184 g, 1 mmol), stirring at the room temperature reaction 2 hours, filtered, concentrated filtrate, ethanol: dichloromethane=1:10 column, get the orange solid 0.064 g, and the yield is 50%.

As the paragraph descriping shows that 578743-87-0 is playing an increasingly important role.

Reference£º
Patent; Jiangsu University Of Science And Technology; Shi Chao; Li Qiuxia; Zhang Xinghua; (24 pag.)CN108690096; (2018); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.34946-82-2,Copper(II) trifluoromethanesulfonate,as a common compound, the synthetic route is as follows.

L (0.0424 g, 0.2 mmol), Cu (CF3SO3)2(0.0691g,0.2mmol)H2O (6 mL), CH3CN (4 mL), water and heat 100Oslow C down to room temperature after three days.After opening the autoclave there for X- ray diffraction analysis of the yellow rod-like crystals.Yield: 35%

34946-82-2, 34946-82-2 Copper(II) trifluoromethanesulfonate 2734996, acopper-catalyst compound, is more and more widely used in various fields.

Reference£º
Patent; Tianjin Normal University; Wang, Ying; (10 pag.)CN104557986; (2016); B;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 7787-70-4, Copper(I) bromide. This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.7787-70-4

A dry and Ar-flushed Schlenk flask was charged with P(OEt)3 (5.2 mL, 30.0 mmol) in benzene (30 mL). CuBr (4.3 g, 30.0 mmol) was added. After the mixture had stirred at r.t. for 1 h and at 80 C for 1 h, unsolved solid was removed by filtration under Ar atmosphere and solvents were evaporated from the filtrate. The resulted mixture was cooled down to -78 C and was washed with n-hexane (2*). The remained solid was dried under vacuum; this gave CuBr*P(OEt)3. Yield: 6.8 g (73%); a mixture of oil and solid.

7787-70-4 Copper(I) bromide 24593, acopper-catalyst compound, is more and more widely used in various fields.

Reference£º
Article; Moriya, Kohei; Schwaerzer, Kuno; Karaghiosoff, Konstantin; Knochel, Paul; Synthesis; vol. 48; 19; (2016); p. 3141 – 3154;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 7787-70-4, name is Copper(I) bromide. This compound has unique chemical properties. The synthetic route is as follows. 7787-70-4

7787-70-4, A mixture of PLN(37.6 mg, 0.2 mmol) containing CH3ONa (11.8 mg, 0.22 mmol) andCuBr (22 mg, 0.2 mmol) in methanolic solution (10 mL) was refluxed for 2 h, followed by addition of 1,10-phenanthroline (36 mg,0.2 mmol) in methanol (10 mL). The mixture was stirred for another 30 min at room temperature to give a dark-red solution and then filtered.The filtrate was kept in air for a week, forming dark-red block crystals. The crystals were isolated, washed three times with distilled water and dried in a vacuum desiccator containing anhydrous CaCl2. Yield: 87.9 mg (81%). Anal. Calcd for C24H19BrCuN2O4 (542.86): C,53.10; H, 3.52 and N, 5.16. Found: C, 53.12; H, 3.53 and N, 5.17. IR(KBr, cm-1): 3500, 3041, 1986, 1837, 1628, 1590, 1568, 1510, 1418,1344, 1196, 1159, 1106, 993, 855, 773, 720, 672, 631, 551, 548, 528,468, 455, 430.

The synthetic route of 7787-70-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Gou, Yi; Zhang, Zhan; Qi, Jinxu; Liang, Shichu; Zhou, Zuping; Yang, Feng; Liang, Hong; Journal of Inorganic Biochemistry; vol. 153; (2015); p. 13 – 22;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”