copper related catalyst

578743-87-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride, cas is 578743-87-0,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

In a dry double-mouth bottle to place Ir – 3 (0.0796 g, 0.1 mmol), CuClNHC (0.0488 g, 0.1 mmol), vacuum pumping and nitrogen cycle three times, then the nitrogen flow by adding 10 ml ethanol, stirring reflux reaction for 4 hours, cooling to room temperature, then added potassium hexafluorophosphate (0.184 g, 1 mmol), stirring at the room temperature reaction 2 hours, filtered, concentrated filtrate, ethanol: dichloromethane=1:10 column, get the orange solid 0.069 g, and the yield is 50%.

The chemical industry reduces the impact on the environment during synthesis,578743-87-0,[1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Jiangsu University Of Science And Technology; Shi Chao; Li Qiuxia; Zhang Xinghua; (24 pag.)CN108690096; (2018); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7787-70-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Copper(I) bromide, cas is 7787-70-4,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

A mixture of PLN(37.6 mg, 0.2 mmol) containing CH3ONa (11.8 mg, 0.22 mmol) andCuBr (22 mg, 0.2 mmol) in methanolic solution (10 mL) was refluxed for 2 h, followed by addition of 1,10-phenanthroline (36 mg,0.2 mmol) in methanol (10 mL). The mixture was stirred for another 30 min at room temperature to give a dark-red solution and then filtered.The filtrate was kept in air for a week, forming dark-red block crystals. The crystals were isolated, washed three times with distilled water and dried in a vacuum desiccator containing anhydrous CaCl2. Yield: 87.9 mg (81%). Anal. Calcd for C24H19BrCuN2O4 (542.86): C,53.10; H, 3.52 and N, 5.16. Found: C, 53.12; H, 3.53 and N, 5.17. IR(KBr, cm-1): 3500, 3041, 1986, 1837, 1628, 1590, 1568, 1510, 1418,1344, 1196, 1159, 1106, 993, 855, 773, 720, 672, 631, 551, 548, 528,468, 455, 430.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Copper(I) bromide, 7787-70-4

Reference£º
Article; Gou, Yi; Zhang, Zhan; Qi, Jinxu; Liang, Shichu; Zhou, Zuping; Yang, Feng; Liang, Hong; Journal of Inorganic Biochemistry; vol. 153; (2015); p. 13 – 22;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

It is a common heterocyclic compound, the copper-catalyst compound, Cuprouschloride, cas is 7758-89-6 its synthesis route is as follows.

Step 5. 3,3-Ethylenedioxy-5alpha-hydroxy-11beta-[4-(N,N-dimethylamino)phenyl]-17alpha-trimethylsilyloxy-21-methyl-19-norpregn-9(10)-en-20-one (25): Mg (2.80 g, 116.2 mmol), which was washed with 0.1 N HCl, then H2O and acetone and dried in vacuo, was weighed into dry round-bottomed flask equipped with a reflux condenser. A small crystal of iodine was added and the system was flushed with nitrogen and flame-dried. The flask was cooled to room temperature and 68.5 mL of THF distilled from LAH was added via syringe. 1,2-Dibromoethane (approx. 0.5 mL) was added and the mixture was stirred at room temperature. After bubbling began and the color of I2 disappeared, a solution of 4-bromo-N,N-dimethylaniline (20.43 g, 102.1 mmol) in THF (34 mL) was added via syringe. The mixture was stirred until most the Mg had reacted. Copper (I) chloride (1.13 g, 114.2 mmol) was added as a solid and stirred for 20 min. The crude epoxide (24) (7.33 g, 15.91 mmol) in THF (49 mL) was then added using a syringe. The reaction mixture was stirred at room temperature for 30 min, at which time the reaction was complete by TLC (2% acetone/CH2Cl2). Saturated NH4Cl solution (25 mL) was added and stirred for 30 min while air was pulled through by slight vacuum. The mixture was diluted with H2O, extracted with CH2Cl2 (3*), washed with H2O (2*) and brine, dried over Na2SO4, and evaporated under reduced pressure. The residue was purified by flash chromatography using 3% acetone/CH2Cl2) to afford 4.27 g of the pure product (25) in 46.1% yield. IR (KBr, diffuse reflectance) numax 3531, 2940, 1708, 1614, and 1518 cm-1. NMR (CDCl3) delta 0.09 (s, 9H, Si(CH3)3), 0.19 (s, 3H, C18-CH3), 1.02 (t, J=7 Hz, 3H, C21-CH3), 2.88 (s, 6H, N(CH3)2), 3.99 (m, 4H, C3-OCH2CH2O-), 4.26 (br d, 1 H, C11alpha-CH), 6.85 (dd, J=41 Hz, J’=10 Hz, 4H, aromatic-CH). MS (EI) m/z (relative intensity): 581 (M+, 46), 563(34), 391 (37), 134(65) and 121 (100).

7758-89-6, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,7758-89-6 ,Cuprouschloride, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; The United States of America as represented by the Department of Health and Human Services; US6900193; (2005); B1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Name is Copper(I) bromide, as a common heterocyclic compound, it belongs to copper-catalyst compound, and cas is 7787-70-4, its synthesis route is as follows.

a. 2-(carboxy-5-nitro-phenyl)malonic acid dimethyl ester (2) A solution of 2-chloro-4-nitrobenzoic acid (75 g, 372 mmol) in dimethyl malonate (900 mL) was sparged with nitrogen for 15 min. Sodium methoxide (48.3 g, 894 mmol) was added in one portion and the contents exothermed to 480 C. Fifteen minutes later, copper (I) bromide (5.4 g, 37 mmol) was added in one portion and the contents heated to 70 C. for 24 hrs. The reaction was 70% complete by nmr, the contents heated to 85 C. for 6 hrs to completely consume the 2-chloro-4-nitrobenzoic. Water (900 mL) was added to the cooled reaction followed by hexanes (900 mL). The aqueous layer was separated, toluene (900 mL) added, filtered through celite, and aqueous layer separated. Fresh toluene (1800 mL) was added to the aqueous layer and the biphasic mixture acidified with 6N aqueous HCl (90 mL). A white precipitate formed and the contents stirred for 18 hrs. The product was filtered off and dried to give a white soid (78.1 g, 70%) mp=153 C. 1 H NMR (CD3)2 SO delta 78.37 (d, J=2 Hz, 1H), 8.30 (d, J=1 Hz, 2H), 5.82 (s, 1H), (3.83 (s, 6H). 13 C NMR (CD3)2 SO delta 168.0, 167.3, 149.4, 137.1, 135.8, 132.5, 125.4, 123.7, 54.5, 53.4. Anal. Calcd for C11 H10 NO8: C, 48.49; H, 3.73; N, 4.71. Found: C, 48.27; H. 3.72; N, 4.76.

7787-70-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,7787-70-4 ,Copper(I) bromide, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Pfizer INc.; US5919795; (1999); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

578743-87-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride, cas is 578743-87-0,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a stirred solution of imidazolium salts (0.045 mmol), NaOtBu (4.3 mg, 0.045 mmol) and CuCl (4.5mg, 0.045 mmol) was added THF (0.5 mL, 0.09 M) at 30 oC under argon atmosphere. After stirring for 2 h, the solution of K+[CF3B(OMe)3]- (63.5 mg, 0.3 mmol, 6.0 equiv) in DMF (0.5 mL) was added dropwise. Then the mixture was kept stirring at 30 oC for 10 h. After that, the reaction was quenched with water. Aqueous layer was extracted with EtOAc (15 mL x 3), and the combined organic layers was washed with brine, dried over Na2SO4 and concentrated under reduced pressure. Then the crude product was purified by column chromatography on silica gel to give the imidazolinone 3b-d.

The chemical industry reduces the impact on the environment during synthesis,578743-87-0,[1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride,I believe this compound will play a more active role in future production and life.

Reference£º
Article; Zeng, Wei; Wang, Enyu; Qiu, Rui; Sohail, Muhammad; Wu, Shaoxiang; Chen, Fu-Xue; Journal of Organometallic Chemistry; vol. 743; (2013); p. 44 – 48;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

34946-82-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Copper(II) trifluoromethanesulfonate, cas is 34946-82-2,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

2-Phenylpyridine 1a (71 muL, 0.5 mmol),1,2-diphenylethylene 2a (89.7 mg, 0.5 mmol),{[Cp * RhCl2] 2} (3.1 mg, 1 mol%),AgOTf (5.1 mg, 0.02 mmol),Cu (OTf) 2 (180.8 mg, 0.5 mmol)Was added to 2.0 mL of methanol, under argon (1 atm)120 oC reaction after 22 hours to stop the reaction,Diatomaceous earth filter, dichloromethane washing, collecting organic phase evaporated solvent,Methanol / ether / petroleum ether (1: 4: 100) to give the pure isoquinoline salt derivative 3aa. The product was a white solid in 91%

The chemical industry reduces the impact on the environment during synthesis,34946-82-2,Copper(II) trifluoromethanesulfonate,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences; Huang, Hanmin; Zhang, Guoyang; (21 pag.)CN104177357; (2017); B;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

14172-91-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 5,10,15,20-Tetraphenyl-21H,23H-porphine copper(II), cas is 14172-91-9,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

General procedure: Under the protection of nitrogen, 0.14 mmol of the corresponding 5,10,15,20-tetrakis(4-R-phenyl)porphyrin copper(II)complex was dissolved in 16 ml of CHCl3, to which 0.75 ml of DMFwas added with magnetic stirring. The solution was cooled to 0 Cin an ice bath, and then 0.56 ml of phosphoryl chloride (POCl3) wasslowly added within 20 min. The ice bath was removed and stirringwas continued at room temperature for 1 h, and the solution wascontinuously stirred and heated at 70 C for 24 h. Then 3.606 g ofNaAc and 14.4 ml of distilled water were added in an ice bath andstirring for another 1 h. After separation of the aqueous layer, theorganic layer was washed with 10 ml of distilled water for 3 times,then dried over anhydrous magnesium sulfate and filtered. Thesolvent was removed by rotary evaporation at low temperature toafford a crude product. The crude product was dissolved indichloromethane and subjected to column chromatography overneutral alumina with dichloromethane/petroleum ether (v/v 3:1)as the eluent. The third coloured bandwas collected and the solventwas removed by rotary evaporation to afford a purple powder.

The chemical industry reduces the impact on the environment during synthesis,14172-91-9,5,10,15,20-Tetraphenyl-21H,23H-porphine copper(II),I believe this compound will play a more active role in future production and life.

Reference£º
Article; Wu, Zhen-Yi; Yang, Sheng-Yan; Journal of Molecular Structure; vol. 1188; (2019); p. 244 – 254;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

578743-87-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride, cas is 578743-87-0,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

Chloro[l ,3-bis(2,6-di-i-propylphenyl)imidazol-2-ylidene]copper(I) (487.59 mg, 0.25 mmol) and silver triflate (64.2 mg, 0.25 mmol) were mixed under nitrogen in 25 mL flask and 10 mL of dry THF were added. Reaction mixture was stirred at RT for 30 minutes. Solution of 1 ,2-bis(diphenylphosphino)benzene (1 1 1.6 mg, 0.25 mmol) in dry THF (5 mL) was added. Reaction mixture was stirred at RT overnight. Resulting mixture was filtered through Celite and solvent was evaporated on rotovap. Recrystallization from CH2CI2 by vapor diffusion of Et20 gave 130 mg (49.6%) of white needle crystals. Structure confirmed by 1H-NMR spectrum of [(IPR)Cu(dppbz)]OTf (CDCb, 400MHz).

The chemical industry reduces the impact on the environment during synthesis,578743-87-0,[1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; THE UNIVERSITY OF SOUTHERN CALIFORNIA; THOMPSON, Mark; DJUROVICH, Peter; KRYLOVA, Valentina; WO2011/63083; (2011); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belongs to copper-catalyst compound, name is Copper(I) bromide, and cas is 7787-70-4, its synthesis route is as follows.

a. 2-(carboxy-5-nitro-phenyl)malonic acid dimethyl ester (2) A solution of 2-chloro-4-nitrobenzoic acid (75g, 372mmol) in dimethyl malonate (900mL) was sparged with nitrogen for 15 min. Sodium methoxide (48.3g, 894mmol) was added in one portion and the contents exothermed to 48C. Fifteen minutes later, copper (I) bromide (5.4g, 37mmol) was added in one portion and the contents heated to 70C for 24 hrs. The reaction was 70% complete by nmr, the contents heated to 85C for 5 hrs to completely consume the 2-chloro-4-nitrobenzoic. Water (900mL) was added to the cooled reaction followed by hexanes (900mL). The aqueous layer was separated, toluene (900mL) added, filtered through celite, and aqueous layer separated. Fresh toluene (1800mL) was added to the aqueous layer and the biphasic mixture acidified with 6N aqueous HCl (90mL). A white precipitate formed and the contents stirred for 18 hrs. The product was filtered off and dried to give a white solid (78.1g, 70%) mp=153C. 1H NMR (CD3)2SO delta 8.37 (d, J = 2 Hz, 1H), 8.30 (d, J = 1Hz, 2H), 5.82 (s, 1H), 3.83 (s, 6H). 13C NMR (CD3)2SO delta 168.0, 167.3, 149.4, 137.1, 135.8, 132.5, 125.4, 123.7, 54.5, 53.4. Anal. Calcd for C11H10NO8: C, 48.49; H, 3.73; N, 4.71. Found: C, 48.27; H, 3.72; N, 4.76.

7787-70-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,7787-70-4 ,Copper(I) bromide, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; PFIZER INC.; EP1181954; (2002); A2;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7787-70-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Copper(I) bromide, cas is 7787-70-4,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

Compound 2 (23mg, 0.05mmol) in dichloromethane (2mL) was slowly added on a solution of copper bromide (7.2mg, 0.05mmol) in acetonitrile (2mL) at-60C. The orange-red solution resulting from complete diffusion was slowly evaporated at r.t. to afford compound 6 (quantitative yield) as colorless crystals suitable for an X-ray diffraction analysis. Mp=93C. 1H NMR (CDCl3, 300MHz): delta 5.21 (s, 4H, =CH2), 4.30-3.95 (m, 8H, CH2-C=), 4.00-2.35 (m, 24H). Br2C20Cu2H36O4S4 (755.56): calcd C 31.79, H, 4.80; found: C 31.09, H, 4.22.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Copper(I) bromide, 7787-70-4

Reference£º
Article; Carel, Guillaume; Madec, David; Saponar, Alina; Saffon, Nathalie; Nemes, Gabriela; Rima, Ghassoub; Castel, Annie; Journal of Organometallic Chemistry; vol. 755; (2014); p. 72 – 77;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”