copper related catalyst

It is a common heterocyclic compound, the copper-catalyst compound, Copper(II) trifluoromethanesulfonate, cas is 34946-82-2 its synthesis route is as follows.

A solution of Cu(OTf )2 (0.089 g, 0.25 mmol) in 1 mL of CH3CN was added to a stirred solution of 2-pina (0.050 g, 0.25 mmol) in 1 mL of CH3CN. The blue suspension was stirred for 1.5 h and the solvent was removed under reduced pressure. The resulting blue solid was washed with Et2O (5 mL ¡Á 3). Dissolving the product in DMF and vapor diffusion of Et2O into the blue solution at room temperature led to green crystals suitable for X-ray crystallographic characterization (0.095 g, 54% yield). Anal. Calcd for C19H23N5O9F6S2Cu: C, 32.28; H, 3.28; N, 9.90. Found: C, 31.96; H, 3.03; N, 10.15. FT-IR (cm-1): 1644, 1619, 1546, 1457, 1431, 1386, 1369, 1243, 1223, 1147, 1106, 1028, 862, 759, 698, 667, 634, 572, 516, 418.

34946-82-2, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,34946-82-2 ,Copper(II) trifluoromethanesulfonate, other downstream synthetic routes, hurry up and to see

Reference£º
Article; McMoran, Ethan P.; Mugenzi, Clement; Fournier, Kyle; Draganjac, Mark; Tony, Donavon; Jeong, Kwangkook; Powell, Douglas R.; Yang, Lei; Journal of Coordination Chemistry; vol. 69; 3; (2016); p. 375 – 388;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

It is a common heterocyclic compound, the copper-catalyst compound, Copper(II) trifluoromethanesulfonate, cas is 34946-82-2 its synthesis route is as follows.

To a solution ofTX-CH2COOH (1 g, 3.7 mmol) in distilled water (50 mL), was addedNaOH (148 mg, 3.7 mmol) to give sodium thioxanthone carboxylate (Na+TX-CH2COO-). Tothis solution Cu(OTf)2 (670 mg, 1.85 mmol) was added upon whichCu(TX)2 formed as a green precipitate. The resultant was separatedby filtration and dried in vacuo to obtain a greensolid. Yield 62%. Elementalanalysis; Calculated: C 66.90%; H 3.37%; O 17.82%; S 11.91%. Found: C 61.13%, H4.75%, O 18.97, S 14.25%. Melting point: 232 C.

34946-82-2, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,34946-82-2 ,Copper(II) trifluoromethanesulfonate, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Dadashi-Silab, Sajjad; Yagci, Yusuf; Tetrahedron Letters; vol. 56; 46; (2015); p. 6440 – 6443;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Name is Copper(I) bromide, as a common heterocyclic compound, it belongs to copper-catalyst compound, and cas is 7787-70-4, its synthesis route is as follows.

Copper(I) bromide was treated with 3 equiv of triphenylphosphine in methanol. The mixture was stirred for 4-5 h, and the pale yellow solid was filtered off and dried. Yield of Cu(PPh3)3Br 90%.

7787-70-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,7787-70-4 ,Copper(I) bromide, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Saeed; Larik; Jabeen; Mehfooz; Ghumro; El-Seedi; Ali; Channar; Ashraf; Russian Journal of General Chemistry; vol. 88; 3; (2018); p. 541 – 550;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

34946-82-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Copper(II) trifluoromethanesulfonate, cas is 34946-82-2,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

Was added to the Schlenk tube Cu(OTf)2 (0.01mmol), ligand (Ra,S,S)-I-Ph (0.01mmol) N2 protection, the solvent was added CHCl3(2 mL), stirred at room temperature for 4 hours ligand, and concentrated under reduced pressure, vacuum drained, i.e., quantitative complex to give [(Ra,S,S)-I-Ph]Cu(OTf)2.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Copper(II) trifluoromethanesulfonate, 34946-82-2

Reference£º
Patent; Zhejiang University; Lin Xufeng; Gu Haorui; Sun Weiye; (21 pag.)CN108794420; (2018); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

13395-16-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Bis(acetylacetone)copper, cas is 13395-16-9,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

General procedure: In a typical synthesis of Cu40Ag60, 0.45mmol Cu(acac)2 and 0.35 Ag (ac) was mixed with 3mL of OAm, 1 mL of OAc and 11mL of ODE. All synthesis was conducted in a four-necked glass reactor allowing the precise temperature control and inert gas atmosphere under dark conditions. Firstly, the mixture was heated to 60C and kept at this temperature for 10min. Then, the mixture was heated to 180C and kept at this temperature for 30min before it was cooled down to room temperature. After cooling, the resultant reaction mixture was collected with hexane (2mL) and the NPs were separated by centrifugation (8500rpm, 12min) after adding isopropanol (40mL). To further purify the yielded CuAg NPs, the product was centrifuged (8500rpm, 12min) one more time with ethanol (40mL). Finally, the remaining product was dispersed in hexane (10mL) for further use. By using the same recipe and varying metal precursor amounts, two different compositions of CuAg NPs were synthesized. Reductive mixing of 0.3mmol Cu(acac)2 and 0.5 Ag(ac) resulted in Cu30Ag70 NPs and mixing 0.6mmol Cu(acac)2 with 0.4 Ag (ac) led to Cu60Ag40. Synthesis of Ag NPs was conducted with the same recipe without using Cu precursor.

The chemical industry reduces the impact on the environment during synthesis,13395-16-9,Bis(acetylacetone)copper,I believe this compound will play a more active role in future production and life.

Reference£º
Article; Balkan, Timucin; Kuecuekkececi, Hueseyin; Kaya, Sarp; Metin, Oender; Zarenezhad, Hamaneh; Journal of Alloys and Compounds; vol. 831; (2020);,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

14172-91-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 5,10,15,20-Tetraphenyl-21H,23H-porphine copper(II), cas is 14172-91-9,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

Copper(II) meso-tetra(4-carboxyphenyl)porphine (8.8 mg, 0.01 mmol) and fumaric acid (9.9 mg, 0.06 mmol) were dissolved in DMF (5 mL) in a small capped vial, sonicated to ensure homogeneity and heated to 80 C for 72 h, followed by 72 h of evaporation in a crystallizing dish, yielding diffraction quality fibrous red crystals. numax/cm-1: 3403 (C(sp2)H), 2770 (OH), 1390-1280 (C=O). 1600-1450 (CC), 1320 (CO), 1380 (CN), 1006 (CuTCPP), 790-600 (CH). Found: C, 59.91; H, 5.17; N, 9.54; O, 18.40. Calc. for C66H68CuN10O14: C, 61.50; H, 5.32; N, 10.87; O, 17.38.

The chemical industry reduces the impact on the environment during synthesis,14172-91-9,5,10,15,20-Tetraphenyl-21H,23H-porphine copper(II),I believe this compound will play a more active role in future production and life.

Reference£º
Article; Fidalgo-Marijuan, Arkaitz; Amayuelas, Eder; Barandika, Gotzone; Bazan, Begona; Urtiaga, Miren Karmele; Arriortua, Maria Isabel; Molecules; vol. 20; 4; (2015); p. 6683 – 6699;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7787-70-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Copper(I) bromide, cas is 7787-70-4,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

General procedure: 0.028g (0.283mmol) of CuCl was added to 0.220g (0.133mmol) of [PPh4]2[1] dissolved in 20mL of MeCN solution. After stirring the resultant solution for 1hat RT, the yellowish brown solution formed. The solution was filtered, and the solvent was removed in vacuo. The precipitate was washed with Et2O and MeOH and extracted with CH2Cl2 which was then recrystallized with Et2O/MeOH/CH2Cl2 to give [PPh4]2[5a] (0.110g, 0.064mmol, 96% based on Se). Similarly, under the same reaction conditions, using CuBr and CuI, we have isolated a yellowish brown solid of [PPh4]2[5b] (98% based on Se) and [PPh4]2[5c] (71% based on Se), respectively, upon crystallization from Et2O/MeOH/CH2Cl2. [PPN]2[5a] and [PPN]2[5c] were synthesized according to a similar procedure.

The chemical industry reduces the impact on the environment during synthesis,7787-70-4,Copper(I) bromide,I believe this compound will play a more active role in future production and life.

Reference£º
Article; Shieh, Minghuey; Miu, Chia-Yeh; Liu, Yu-Hsin; Chu, Yen-Yi; Hsing, Kai-Jieah; Chiu, Jung-I; Lee, Chung-Feng; Journal of Organometallic Chemistry; vol. 815-816; (2016); p. 74 – 83;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

34946-82-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Copper(II) trifluoromethanesulfonate, cas is 34946-82-2,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

L (0.0424 g, 0.2 mmol), Cu (CF3SO3)2(0.0691g,0.2mmol)H2O (6 mL), CH3CN (4 mL), water and heat 100Oslow C down to room temperature after three days.After opening the autoclave there for X- ray diffraction analysis of the yellow rod-like crystals.Yield: 35%

The chemical industry reduces the impact on the environment during synthesis,34946-82-2,Copper(II) trifluoromethanesulfonate,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Tianjin Normal University; Wang, Ying; (10 pag.)CN104557986; (2016); B;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Name is Copper(I) bromide, as a common heterocyclic compound, it belongs to copper-catalyst compound, and cas is 7787-70-4, its synthesis route is as follows.

Copper bromide (2.223 g, 10.00 mmols) was added to 2-pyridone (1.936 g, 20.38 mmols) dissolved in 10 mL THF, 3 mL of water, and 0.859 g (10.6 mmol) concentrated HBr (?9 M). Dark crystals formed in solution after one week. The product was isolated by vacuum filtration, washed with cold THF, and air-dried to yield 3.41 g (82%) of brown crystals. Single crystals (brown prisms) were obtained by recrystallization in THF/water (10:3). IR (KBr): 3241m, 3150m, 3082m, 2936m (nu N-H), 1638s/1621s (C=O) 1586s, 1536s, 1466m, 1374s, 1277m, 1216m, 1156m, 1091m, 997m, 859m, 775s, 718m, 593m, 539m, 511m cm-1. Anal. Calc. for C20H20N4O4Cu2Br4: C, 29.04; H, 2.44; N, 6.77. Found: C, 28.79; H, 1.76; N, 6.60%.

7787-70-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,7787-70-4 ,Copper(I) bromide, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Shortsleeves, Kelley C.; Turnbull, Mark M.; Seith, Christopher B.; Tripodakis, Emilia N.; Xiao, Fan; Landee, Christopher P.; Dawe, Louise N.; Garrett, David; De Delgado, Graciela Diaz; Foxman, Bruce M.; Polyhedron; vol. 64; (2013); p. 110 – 121;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

It is a common heterocyclic compound, the copper-catalyst compound, Copper(I) bromide, cas is 7787-70-4 its synthesis route is as follows.

Example 1 2-(Carboxy-5-nitro-phenyl)malonic acid dimethyl ester A solution of 2-chloro-4-nitrobenzoic acid (75 g, 372 mmol) in dimethyl malonate (900 mL, 20 equivalents) was degassed with nitrogen for 15 min. Copper (I) bromide (5.4 g, 37 mmol) was added in one portion. Sodium methoxide (48.3 g, 894 mmol) was added in one portion to the solution while stirring and the contents exothermed to 48 C. Fifteen minutes later, the contents were heated to 70 C. for 24 hrs. The reaction was complete by nmr. Water (900 mL) was added to the cooled reaction followed by hexanes (900 mL). The aqueous layer was separated, toluene (900 mL) added, the solution filtered through Celite, and the aqueous layer separated. Fresh toluene (1800 mL) was added to the aqueous layer and the biphasic mixture acidified with 6 N aqueous HCl (90 mL). A white precipitate formed and the contents were stirred for 18 hrs. The product was filtered off and dried to give a white solid, 78.1 g (70%, mp 153 C.). IR 2923, 2853, 1750, 1728, 1705, 1458, 1376, 1352, 1305, 1261 cm-1.1 H NMR (CD3)2 SO delta8.37(d,J=2 Hz, 1H), 8.30 (d,J=1 Hz,2H), 5.82(s, 1H),3.83 (s,6H).13 C NMR (CD3)2 SOdelta168.0, 167.3, 149.4, 137.1, 135.8, 132.5, 125.4, 123.7, 54.5, 53.4.Anal. Calcd for C11 H10 NO8:C,48.49; H,3.73; N, 4.71. Found:C, 48.27; H,3.72; N, 4.76.

7787-70-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,7787-70-4 ,Copper(I) bromide, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Pfizer Inc; US5968950; (1999); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”