Tag: M.W:100-200

As a common heterocyclic compound, it belongs to copper-catalyst compound, name is Copper(I) bromide, and cas is 7787-70-4, its synthesis route is as follows.,7787-70-4

a. 2-(carboxy-5-nitro-phenyl)malonic acid dimethyl ester (2) A solution of 2-chloro-4-nitrobenzoic acid (75g, 372mmol) in dimethyl malonate (900mL) was sparged with nitrogen for 15 min. Sodium methoxide (48.3g, 894mmol) was added in one portion and the contents exothermed to 48C. Fifteen minutes later, copper (I) bromide (5.4g, 37mmol) was added in one portion and the contents heated to 70C for 24 hrs. The reaction was 70% complete by nmr, the contents heated to 85C for 5 hrs to completely consume the 2-chloro-4-nitrobenzoic. Water (900mL) was added to the cooled reaction followed by hexanes (900mL). The aqueous layer was separated, toluene (900mL) added, filtered through celite, and aqueous layer separated. Fresh toluene (1800mL) was added to the aqueous layer and the biphasic mixture acidified with 6N aqueous HCl (90mL). A white precipitate formed and the contents stirred for 18 hrs. The product was filtered off and dried to give a white solid (78.1g, 70%) mp=153C. 1H NMR (CD3)2SO delta 8.37 (d, J = 2 Hz, 1H), 8.30 (d, J = 1Hz, 2H), 5.82 (s, 1H), 3.83 (s, 6H). 13C NMR (CD3)2SO delta 168.0, 167.3, 149.4, 137.1, 135.8, 132.5, 125.4, 123.7, 54.5, 53.4. Anal. Calcd for C11H10NO8: C, 48.49; H, 3.73; N, 4.71. Found: C, 48.27; H, 3.72; N, 4.76.

7787-70-4 is used more and more widely, we look forward to future research findings about Copper(I) bromide

Reference£º
Patent; PFIZER INC.; EP1181954; (2002); A2;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7787-70-4, Copper(I) bromide is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

7787-70-4, (a) Preparation of 1-(3,4-dimethoxyphenyl)indole-2-carboxylic acid ethyl ester 4-Bromoveratrole (8.8 g, 40 mmol), indole-2-carboxylic acid ethyl ester (1.9 g, 10 mmol), potassium carbonate (1.9 g), copper- (I) bromide (o.2 g), pyridine (2 ml) and nitrobenzene (10 ml) were stirred at 140 C. for 14 hours. After cooling to room temperature, the reaction mixture was applied onto a silica gel flash chromatography column (silica gel: 140 g). The column was subsequently eluted with toluene (500 ml), toluene/acetone (95:5, 500 ml) and toluene/acetone (90:10, 500 ml). 1-(3,4-Dimethoxyphenyl)indole-2-carboxylic acid ethyl ester was eluted with toluene/acetone (90:10) and gave colorless crystals upon evaporation of the solvent. The crystals were triturated with diisopropyl ether, collected by vacuum filtration and dried in the air. Yield: 3.0 g. (92% of theoretical yield) M.pt.: 126-128 C. Rf (toluene/acetone, 9:1)=0.53.

As the paragraph descriping shows that 7787-70-4 is playing an increasingly important role.

Reference£º
Patent; Shell Research Limited; US5399559; (1995); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO233,mainly used in chemical industry, its synthesis route is as follows.,7787-70-4

CuBr2 (12.5 mg, 0.056 mmol) dissolved in 14 mL absolute ethyl alcohol was slowly dropwise added into a dichloromethane solution(10 mL) containing 20.2 mg (0.05 mmol) of deebq at ambient temperature. The mixture was stirred for 1 min to give a dark red-brown solution. Then, four droplets of hydrobromic acid together with five droplets of hydrogen dioxide were in turn added to it. After stirring for another 1 min, the mixture was abruptly transformed into pale red-brown and allowed standing 24 h. The achieved crystal was collected by filtration, washed with EtOH and dried in vacuum. Yield: 92%. Anal. Calc. for C48H40N4O8Cu2-Br4: C, 46.21; H, 3.23; N, 4.49. Found: C, 46.14; H, 3.04; N, 4.17% .IR (KBr pellet, cm-1): 3067(w) for the nuC-H of the quinolyl ring; 2981(m), 2933(w), 2902(w), 2872(w) for the nuC-H of -CH3 and -CH2; 1729(s) for the nuC=O of the -COOCH2CH3; 1589 (m),1512 (m), 1459 (m) for the nuC=C and mC=N of the quinolyl ring;1265(s), 1209(s), 1102(m) for the nuC-O-C of the -COOCH2CH3.

With the complex challenges of chemical substances, we look forward to future research findings about Copper(I) bromide,belong copper-catalyst compound

Reference£º
Article; Yang, Hao; Sun, Xiao-Mei; Ren, Xiao-Ming; Polyhedron; vol. 83; (2014); p. 24 – 29;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7787-70-4, Copper(I) bromide is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

7787-70-4, A dichloromethane (2mL) solution of macrocycle 1 (12mg, 0.05mmol) was allowed to diffuse slowly through a solution of copper bromide (7.2mg, 0.05mmol) in acetonitrile (2mL) at-60C. Slow evaporation of the orange solution at room temperature afforded compound 5, in a quantitative yield, as colorless crystals suitable for an X-ray diffraction analysis. 1H NMR (CDCl3, 300MHz): delta 5.30-5.20 (m, 2H, =CH2), 4.60-2.20 (m, 16H, CH2). BrC10CuH18O2S2 (377.83): calcd C 31.79, H, 4.80; found: C 31.49, H, 4.52.

7787-70-4 Copper(I) bromide 24593, acopper-catalyst compound, is more and more widely used in various fields.

Reference£º
Article; Carel, Guillaume; Madec, David; Saponar, Alina; Saffon, Nathalie; Nemes, Gabriela; Rima, Ghassoub; Castel, Annie; Journal of Organometallic Chemistry; vol. 755; (2014); p. 72 – 77;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

A common heterocyclic compound, the copper-catalyst compound, name is Copper(I) bromide,cas is 7787-70-4, mainly used in chemical industry, its synthesis route is as follows.,7787-70-4

General procedure: The complexes were typically obtained from the reaction of the copper halide (CuX) with the appropriate camphor ligand in THF (3 mL) upon stirring for ca. 18 h at room temperature. Filtration of the precipitate, washing with n-pentane (ca. 6mL) and drying under vacuum affords the Cu(I) complex.

As the rapid development of chemical substances, we look forward to future research findings about 7787-70-4

Reference£º
Article; Fernandes, Tiago A.; Mendes, Filipa; Roseiro, Alexandra P.S.; Santos, Isabel; Carvalho, M. Fernanda N.N.; Polyhedron; vol. 87; (2015); p. 215 – 219;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Copper(I) bromide, cas is 7787-70-4, it is a common heterocyclic compound, the copper-catalyst compound, its synthesis route is as follows.,7787-70-4

CuBr (0.2 g, 1.39 mmol) wasdissolved in a mixture of dichloromethane (30 ml) and acetonitrile (30 ml) and then 2-benzylpyridine (0.23 g, 1.39 mmol)dissolved in dichloromethane (20 ml) was added. The mixture was stirred for 2 h at room temperature and allowed to standovernight. The next day the colour of the solution was green indicating the oxidation of Cu(I) to Cu(II) and the green solidwas filtered off and recrystallized from methanol. Yield (70%).

As the rapid development of chemical substances, we look forward to future research findings about 7787-70-4

Reference£º
Article; Aguirrechu-Comeron; Pasan; Gonzalez-Platas; Ferrando-Soria; Hernandez-Molina; Journal of Structural Chemistry; vol. 56; 8; (2015); p. 1563 – 1571; Zh. Strukt. Kim.; vol. 56; 8; (2015); p. 1624 – 1632;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Name is Copper(I) bromide, as a common heterocyclic compound, it belongs to copper-catalyst compound, and cas is 7787-70-4, its synthesis route is as follows.,7787-70-4

A dichloromethane (2mL) solution of macrocycle 1 (12mg, 0.05mmol) was allowed to diffuse slowly through a solution of copper bromide (7.2mg, 0.05mmol) in acetonitrile (2mL) at-60C. Slow evaporation of the orange solution at room temperature afforded compound 5, in a quantitative yield, as colorless crystals suitable for an X-ray diffraction analysis. 1H NMR (CDCl3, 300MHz): delta 5.30-5.20 (m, 2H, =CH2), 4.60-2.20 (m, 16H, CH2). BrC10CuH18O2S2 (377.83): calcd C 31.79, H, 4.80; found: C 31.49, H, 4.52.

With the complex challenges of chemical substances, we look forward to future research findings about Copper(I) bromide

Reference£º
Article; Carel, Guillaume; Madec, David; Saponar, Alina; Saffon, Nathalie; Nemes, Gabriela; Rima, Ghassoub; Castel, Annie; Journal of Organometallic Chemistry; vol. 755; (2014); p. 72 – 77;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Name is Copper(I) bromide, as a common heterocyclic compound, it belongs to copper-catalyst compound, and cas is 7787-70-4, its synthesis route is as follows.,7787-70-4

0.25 mmol (0.066 g) PPh3 was added to 15 ml CH3CN solution ofcopper(I) bromide (0.036 g, 0.25 mmol) and stirred for 1 h. Acolourless precipitate formed to which the ligand L1 (0.067 g,0.25 mmol) and CHCl3 (10 ml) were added. The mixture was stirredfor 1 h. at room temperature. Orange coloured compoundappeared. It was filtered and dried in air. Single crystals wereobtained by slow diffusion of hexane to the dilute solution of thecompound in chloroform. Yield: 0.105 g (78%). FT-IR (KBr pellet,cm1): 3059(w), 2914(w), 2853(w), 2176 (vw), 2031(w),1603(m),1474(m), 1426(m), 1305(w), 1244(w), 1184(w), 1075(m), 1027(m), 970(w), 797(w), 748(s), 688(vs), 506(s), 483(s), 421(w). Anal.found (calc. for [CuI2(Br)2(L1)(PPh3)2]): C, 57.94 (58.01%); H, 4.49(4.50%); N, 5.19 (5.17%), Cu, 11.79 (11.72%).

With the complex challenges of chemical substances, we look forward to future research findings about Copper(I) bromide

Reference£º
Article; Patra, Goutam K.; Pal, Pankaj K.; Mondal, Jahangir; Ghorai, Anupam; Mukherjee, Anindita; Saha, Rajat; Fun, Hoong-Kun; Inorganica Chimica Acta; vol. 447; (2016); p. 77 – 86;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belongs to copper-catalyst compound, name is Copper(I) bromide, and cas is 7787-70-4, its synthesis route is as follows.,7787-70-4

Synthesis of [(SIMes)CuBr]. In an oven-dried vial, copper(I) bromide (0.522 g, 3.63 mmol), SIMes.HCl (0.86 g, 2.52 mmol) and sodium tert-butoxide (0.243 g, 2.52 mmol) were loaded inside a glovebox and stirred in dry THF (18 mL) overnight at room temperature outside of the glovebox. After filtration of the reaction mixture through a plug of Celite, the filtrate was mixed with hexane to form a precipitate. A second filtration afforded 0.808 g (71% yield) of the title complex as an off-white solid.Spectroscopic and analytical data for [(SIMes)CuBr]: 1H NMR (300 MHz, [D6]acetone): delta=7.01 (s, 4H, HAr), 4.16 (s, 4H, NCH2), 2.37 (s, 12H, ArCH3), 2.29 (s, 6H, ArCH3); 13C NMR (75 MHz, CDCl3): delta=202.6 (C, NCN), 138.5 (C, CAr), 135.3 (CH, CAr), 135.0 (C, CAr), 129.7 (CH, CAr), 51.0 (CH2, NCH2), 21.0 (CH3, ArCH3), 18.0 (CH3, ArCH3); Elemental analysis calcd for C21H26BrCuN2 (449.89): C, 56.06; H, 5.83; N, 6.23. Found: C, 55.98; H, 5.64; N, 6.21%.

With the complex challenges of chemical substances, we look forward to future research findings about 7787-70-4,belong copper-catalyst compound

Reference£º
Patent; Institut Catala d’Investigacio Quimica; Institucio Catalana de Recerca i Estudis Avancats; US2009/69569; (2009); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7787-70-4, Copper(I) bromide is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

7787-70-4, a. 2-(carboxy-5-nitro-phenyl)malonic acid dimethyl ester (2) A solution of 2-chloro-4-nitrobenzoic acid (75 g, 372 mmol) in dimethyl malonate (900 mL) was sparged with nitrogen for 15 min. Sodium methoxide (48.3 g, 894 mmol) was added in one portion and the contents exothermed to 480 C. Fifteen minutes later, copper (I) bromide (5.4 g, 37 mmol) was added in one portion and the contents heated to 70 C. for 24 hrs. The reaction was 70% complete by nmr, the contents heated to 85 C. for 6 hrs to completely consume the 2-chloro-4-nitrobenzoic. Water (900 mL) was added to the cooled reaction followed by hexanes (900 mL). The aqueous layer was separated, toluene (900 mL) added, filtered through celite, and aqueous layer separated. Fresh toluene (1800 mL) was added to the aqueous layer and the biphasic mixture acidified with 6N aqueous HCl (90 mL). A white precipitate formed and the contents stirred for 18 hrs. The product was filtered off and dried to give a white soid (78.1 g, 70%) mp=153 C. 1 H NMR (CD3)2 SO delta 78.37 (d, J=2 Hz, 1H), 8.30 (d, J=1 Hz, 2H), 5.82 (s, 1H), (3.83 (s, 6H). 13 C NMR (CD3)2 SO delta 168.0, 167.3, 149.4, 137.1, 135.8, 132.5, 125.4, 123.7, 54.5, 53.4. Anal. Calcd for C11 H10 NO8: C, 48.49; H, 3.73; N, 4.71. Found: C, 48.27; H. 3.72; N, 4.76.

7787-70-4 Copper(I) bromide 24593, acopper-catalyst compound, is more and more widely used in various fields.

Reference£º
Patent; Pfizer INc.; US5919795; (1999); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”