Tag: M.W:100-200

It is a common heterocyclic compound, the copper-catalyst compound, Copper(I) bromide, cas is 7787-70-4 its synthesis route is as follows.

General procedure: Compound 5c was prepared as described for 5a. In this respect, 2 (100 mg, 0.160 mmol) was reacted with [CuBr] (3c) (23 mg, 0.160 mmol). Appropriate work-up, gave 5c (111 mg, 0.144 mmol, 90% based on 2) as a brown solid Mp.: 180 C. IR (KBr, cm-1): nuC?C 1983 (w). 1H NMR (d6-DMSO, delta): 0.24 (s, 9 H, SiMe3), 0.30 (s, 9 H, SiMe3), 7.61 (ddd, 3JH7H6 = 4.7 Hz, 3JH7H8 = 7.3 Hz; 1 H, H7), 7.95 (ddd, 3JH2H1 = 6.3 Hz, 3JH2H3 = 6.6 Hz; 1 H, H2), 8.07 (ddd, 4JH8H6 = 1.5 Hz, 3JH8H7 = 7.3 Hz, 3JH8H9 = 7.8 Hz; 1 H, H8), 8.43 (m, 4JH3H1 = 1.0 Hz, 3JH3H2 = 6.6 Hz; 3JH3H4 = 8.0 Hz, 3JH9H8 = 7.8 Hz; 2 H, H3, H9), 8.67 (dd, 3JH6H7 = 4.7 Hz, 4JH6H8 = 1.5 Hz, 1 H, H6), 8.85 (d, 3JH4H3 = 8.0 Hz, 1 H, H4), 9.05 (dd, 3JH1H2 = 6.3 Hz, 1 H, 4JH1H3 = 1.0 Hz, 1 H, H1), 9.95 (s, 1 H, H5), 10.06 (s, 1 H, H10). ESI-MS (m/z (rel. intens.) in thf: [M++Br] 687 (100), [M+-CuBr + K] 662 (25). Anal. Calc. for C24H28N4CuBrPtSi2 (767.21 g/mol): C, 37.57; H, 3.67; N, 7.30. Found: C, 37.68; H, 3.63; N, 6.92%.

7787-70-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,7787-70-4 ,Copper(I) bromide, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Al-Anber, Mohammed; Wetzold, Nora; Walfort, Bernhard; Rueffer, Tobias; Lang, Heinrich; Inorganica Chimica Acta; vol. 398; (2013); p. 124 – 131;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belongs to copper-catalyst compound, name is Copper(I) bromide, and cas is 7787-70-4, its synthesis route is as follows.,7787-70-4

Example 1 2-(Carboxy-5-nitro-phenyl)malonic acid dimethyl ester A solution of 2-chloro-4-nitrobenzoic acid (75g, 372mmol) in dimethyl malonate (900mL, 20 equivalents) was degassed with nitrogen for 15min. Copper (I) bromide (5.4g, 37mmol) was added in one portion. Sodium methoxide (48.3g, 894mmol) was added in one portion to the solution while stirring and the contents exothermed to 48C. Fifteen minutes later, the contents were heated to 70C for 24hrs. The reaction was complete by nmr. Water (900mL) was added to the cooled reaction followed by hexanes (900mL). The aqueous layer was separated, toluene (900mL) added, the solution filtered through Celite, and the aqueous layer separated. Fresh toluene (1800mL) was added to the aqueous layer and the biphasic mixture acidified with 6 N aqueous HCI (90mL). A white precipitate formed and the contents were stirred for 18hrs. The product was filtered off and dried to give a white solid, 78.1g (70%, mp 153C). IR 2923, 2853, 1750, 1728, 1705, 1458, 1376, 1352, 1305, 1261 cm-1. 1H NMR (CD3)2SO delta8.37 (d, J = 2 Hz, 1H), 8.30 (d, J = 1Hz, 2H), 5.82 (s, 1H), 3.83 (s, 6H). 13C NMR (CD3)2SO delta168.0, 167.3, 149.4, 137.1, 135.8, 132.5, 125.4, 123.7, 54.5, 53.4. Anal. Calcd for C11H10NO8: C, 48.49; H, 3.73; N, 4.71. Found: C, 48.27; H, 3.72; N, 4.76.

With the complex challenges of chemical substances, we look forward to future research findings about 7787-70-4,belong copper-catalyst compound

Reference£º
Patent; PFIZER INC.; EP887345; (1998); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belongs to copper-catalyst compound, name is Copper(I) bromide, and cas is 7787-70-4, its synthesis route is as follows.

A solution of (4-diphenylphosphino)phenanthridine (0.023 g,0.063 mmol) in CH2Cl2 (3 mL) was added drop-wise to a suspensionof CuBr (0.089 g, 0.063 mmol) in CH2Cl2 (3 mL) with constantstirring. The reaction mixture was stirred for overnight at roomtemperature. Then the reaction mixture was filtered through smallplug of Celite and dried under vacuum to give an orange solid.Yield = 0.022 g (71%).

7787-70-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,7787-70-4 ,Copper(I) bromide, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Mondal, Rajarshi; Giesbrecht, Patrick K.; Herbert, David E.; Polyhedron; vol. 108; (2016); p. 156 – 162;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7787-70-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Copper(I) bromide, cas is 7787-70-4,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

Complex 2 was obtained by a similar method as described for 1 using copper(I) bromide (0.032 g,0.22 mmol) in place of copper(I) iodide. Colorless crystals of 2 were obtained (Yield: 0.191 g, 90.3%). 1HNMR (400 M, CDCl3) delta: 7.51-7.36 (m, 22H, m,p-Ph + H3,H4-PC6H4-), 7.33-7.27 (m, 4H, H5,H6-PC6H4-),7.12-7.00 (m, 12H, o-Ph). 13C NMR (100 M, CDCl3) delta: 147.87, 147.67, 140.24, 140.16, 134.31, 134.17, 133.45,131.80, 131.07, 130.71, 130.14, 129.90, 128.93, 128.69, 127.93, 127.26 (Ar-C). 31P NMR (240 M, CDCl3) delta:-9.70 (s). Anal. Calcd for C48H38Cu2Br2P2: C, 59.83; H, 3.97. Found: C, 59.88; H, 3.97. MS (MALDI-TOF): m/zCalcd for [M-2Br-Cu + C24H19P]+, 739.1745, found 739.1747.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Copper(I) bromide, 7787-70-4

Reference£º
Article; Qi, Lei; Li, Qian; Hong, Xiao; Liu, Li; Zhong, Xin-Xin; Chen, Qiao; Li, Fa-Bao; Liu, Qian; Qin, Hai-Mei; Wong, Wai-Yeung; Journal of Coordination Chemistry; vol. 69; 24; (2016); p. 3692 – 3702;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Name is Copper(I) bromide, as a common heterocyclic compound, it belongs to copper-catalyst compound, and cas is 7787-70-4, its synthesis route is as follows.

General procedure: A solution of cuprous chloride (5.8 mg, 0.058 mmol) in acetonitrile(10 mL) was added dropwise to a well stirred solution of 1(30 mg, 0.058 mmol) in dichloromethane (10 mL) at room temperaturewith constant stirring. After stirring for 6 h, the solvent wasremoved under reduced pressure and the residue obtained wasfurther washed with petroleum ether to give 4 as white solid product.Yield

7787-70-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,7787-70-4 ,Copper(I) bromide, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Bhat, Sajad A.; Mague, Joel T.; Balakrishna, Maravanji S.; Inorganica Chimica Acta; vol. 443; (2016); p. 243 – 250;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7787-70-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Copper(I) bromide, cas is 7787-70-4,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

A solution of CuBr (0.0173 g, 0.12 mmol) in 10 mL of acetonitrile was added dropwise to a solution of 4 (0.048 g, 0.12 mmol) in 10 mL of dichloromethane at room temperature. The reaction mixture was stirred for 4 h. The solvent was removed under reduced pressure to obtain 8 as a brown crystalline solid. Yield: 82% (0.054 g). Mp: >195 C (dec). Anal. Calc. for C42H44Cu2Br2N2P2Se2¡¤CH3CN: C, 46.99; H, 4.21; N, 3.74. Found: C, 46.77; H, 4.10; N, 3.79%. 1H NMR (400 MHz, CDCl3) delta 7.73-7.02 (m, Ar, 28H), 3.43 (s, CH2, 4H), 2.46 (s, NMe2, 12H). 31P{1H} NMR (162 MHz, CDCl3): delta 23.2 (br s).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Copper(I) bromide, 7787-70-4

Reference£º
Article; Ananthnag, Guddekoppa S.; Edukondalu, Namepalli; Mague, Joel T.; Balakrishna, Maravanji S.; Polyhedron; vol. 62; (2013); p. 203 – 207;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7787-70-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Copper(I) bromide, cas is 7787-70-4,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

CuI (0.190 g, 1 mmol) was dissolved in acetonitrile (6 ml)at room temperature, followed by the addition of a solution of Hdpt (0.112 g, 0.5 mmol) in acetonitrile (8 ml) with vigorous magnetic stirring in a 25 ml Parr Teflon-lined stainless steel vessel. The mixture was heated for 3 days at 150 C and then cooled to room temperature at a rate of10 C/h.

The chemical industry reduces the impact on the environment during synthesis,7787-70-4,Copper(I) bromide,I believe this compound will play a more active role in future production and life.

Reference£º
Article; Hu, Sheng; Lin, DianRong; Xie, ZhenMing; Zhou, ChangXia; He, WenXi; Yu, FangYong; Transition Metal Chemistry; vol. 40; 6; (2015); p. 623 – 629;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7787-70-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Copper(I) bromide, cas is 7787-70-4,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

General procedure: HLBAP (0.525 g, 1 mmol) and triethylamine (0.28 mL, 2 mmol) were dissolved in a 2:1 acetonitrile/dichloromethane mixture (45 ml), and then copper salt with the corresponding anion (1 mmol) was added. The reaction mixture was stirred for 4 h at room temperature in the presence of air. X-ray quality red brown crystals were grown from a 1:1 solvent mixtureof dichloromethane/methanol.

The chemical industry reduces the impact on the environment during synthesis,7787-70-4,Copper(I) bromide,I believe this compound will play a more active role in future production and life.

Reference£º
Article; Safaei, Elham; Bahrami, Hadiseh; Wojtczak, Andrzej; Alavi, Saman; Jagli?i?, Zvonko; Polyhedron; vol. 122; (2017); p. 219 – 227;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7787-70-4,7787-70-4, Copper(I) bromide is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of CuBr (0.0135 g, 0.094 mmol) in 10 mL of acetonitrile was added dropwise 1 (0.03 g, 0.094 mmol) in dichloromethane (5 mL) at room temperature. The reaction mixture was stirred for 4 h. The solvent was removed under reduced pressure to get 6 as a pale yellow solid. Analtyically pure product of 6 was obtained by recrystallizing the crude product in a 1:2 mixture of dichloromethane and petroleum ether. Yield: 81% (0.035 g). Mp: 158-160 C. Anal. Calc. for C42H44Cu2Br2N2P2: C, 54.66; H, 4.80; N, 3.03. Found: C, 54.95; H, 4.85; N, 2.88%. 1H NMR (400 MHz, CDCl3): delta 7.52-6.83 (m, Ar, 28H), 3.50 (s, CH2, 4H), 2.42 (s, NMe2, 12H). 31P{1H} NMR (162 MHz, CDCl3): delta -16.2 (br s). MS (EI): m/z 845.22 [M-Br]+.

As the paragraph descriping shows that 7787-70-4 is playing an increasingly important role.

Reference£º
Article; Ananthnag, Guddekoppa S.; Edukondalu, Namepalli; Mague, Joel T.; Balakrishna, Maravanji S.; Polyhedron; vol. 62; (2013); p. 203 – 207;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7787-70-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Copper(I) bromide, cas is 7787-70-4,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

Triethyl phosphite (183g, 1.1 mol) was added to a suspension of copper(I) bromide (164.5 g, 1.15 mol) in toluene (500 ml). The mixture was heated at 80C for 3 h with stirring, then left to cool and settle. The clear solution was decanted from the solid residue and the solvent evaporated on a rotary evaporator at 60C, to provide copper(I) bromide triethyl phosphite complex as a clear colourless oil, 336g (94% crude yield).

The chemical industry reduces the impact on the environment during synthesis,7787-70-4,Copper(I) bromide,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2006/67416; (2006); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”