Tag: M.W:100-200

Name is Copper(I) bromide, as a common heterocyclic compound, it belongs to copper-catalyst compound, and cas is 7787-70-4, its synthesis route is as follows.

General procedure: [CuBr(CNR)3] (1-4). Any one of the isocyanides CNR (R=Xyl, 2-Cl-6-MeC6H3, 2-Naphtyl, Cy) (3.1mmol) was added to a suspension of CuBr (143mg, 1.0mmol) in chloroform (5mL) and the reaction mixture was stirred at RT for 1h. The solvent was removed in vacuo and the product was recrystallized by slow concentration of a CH2Cl2/hexane solution at RT to give colorless (1, 2, and 4) or orange (3) crystalline solid. (0027) [CuBr(CNXyl)3] (1). Yield 530mg, 99%. Anal. Calc. for C27H27N3BrCu: C, 60.39; H, 5.07; N, 7.83. Found: C, 59.88; H, 4.89; N, 7.70%. HRESI+-MS, m/z: 325.0756 ([M-(XylNC)2]+, calcd 325.0760). IR spectrum in KBr, selected bands, cm-1: 2136 s nu(C?N). 1H NMR in CDCl3, delta: 2.49 (s, 6H, CH3), 7.11 (d, J 7.6Hz, 2H, aryl) 7.23 (d, J 7.6Hz, 1H, aryl). 13C{1H} NMR in CDCl3, delta: 18.95 (CH3), 127.92, 129.33, 135.49 (aryl).

7787-70-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,7787-70-4 ,Copper(I) bromide, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Melekhova, Anna A.; Novikov, Alexander S.; Luzyanin, Konstantin V.; Bokach, Nadezhda A.; Starova, Galina L.; Gurzhiy, Vladislav V.; Kukushkin, Vadim Yu.; Inorganica Chimica Acta; vol. 434; (2015); p. 31 – 36;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7787-70-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Copper(I) bromide, cas is 7787-70-4,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

A mixture of CuBr (0.57g, 4mmol) and 2,9-dimethyl-1,10-phenanthroline (L3) (0.72g, 2mmol) in CH3CN (30ml) was stirred overnight under nitrogen atmosphere at room temperature. The copper complex was obtained as a brick-red solid in 90% yield.

The chemical industry reduces the impact on the environment during synthesis,7787-70-4,Copper(I) bromide,I believe this compound will play a more active role in future production and life.

Reference£º
Article; Liang, Zhaoli; Wang, Fei; Chen, Pinhong; Liu, Guosheng; Journal of Fluorine Chemistry; vol. 167; (2014); p. 55 – 60;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7787-70-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Copper(I) bromide, cas is 7787-70-4,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

Cuprous iodide (0.198 g, 1.04 mmol)Adding to a solution of 3,4-bis(diphenylphosphino)-2,5-dimethylthiophene (dpmt) (0.500 g, 1.04 mmol) synthesized in Example 1 in 30 mL of CH2Cl2,The mixture was stirred at room temperature for 5 h. Filter the reaction mixture,The solvent was removed under reduced pressure to give a pale yellow powder.The powder was dissolved in dichloromethane and recrystallized to give 0.615 g of yellow crystals.That is, the complex 1 was found to have a yield of 88.1%.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Copper(I) bromide, 7787-70-4

Reference£º
Patent; Hubei University; Liu Li; Wei Qiong; (15 pag.)CN108997382; (2018); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

1317-39-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Copper(I) oxide, cas is 1317-39-1,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

3-Chloro-4-nitro-benzonitrile Sodium nitrite (6.78 g in water (40 mL) at 0 C.) was slowly added to a solution of 4-amino-3-chloro-benzonitrile (10.5 g) in water (30 mL) and concentrated hydrochloric acid (30 mL) also at 0 C. After 10 minutes the solution was poured onto a suspension of cuprous oxide (3.48 g) and sodium nitrite (31.69 g) in water (100 mL) at 0 C. The ensuing mixture was stirred at 0 C. for 1 hour then at 23 C. for 1 hour. The resulting mixture was extracted with dichloromethane and the organic layer washed with saturated sodium chloride. The separated organic layer was dried over sodium sulfate and then concentrated to give 3-chloro-4-nitro-benzonitrile (11.31 g).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Copper(I) oxide, 1317-39-1

Reference£º
Patent; Pfizer Inc.; US2003/78432; (2003); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

6046-93-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Copper(II) acetate hydrate, cas is 6046-93-1,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A solution of Cu(OAc)2¡¤H2O (4.6 mmol) in methanol (10 mL) was added to a solution of corresponding porphyrin (1.15 mmol) in methylene chloride (50 mL). The resulting mixture was stirred flor 1.5 h at room temperature with TLC monitoring (CHCl3-hexane 1:2). Then the reaction mixture was poured into water and extracted with methylene chloride. The organic layer was dried over Na2SO4, and the solvent was removed under reduced pressure. The residue was used without purification. 5,10,15,20-(tetraphenylporphyrinato)copper(II) (13) [56] (757 mg,yield 97%). UV-Vis (CH2Cl2) >max, (j10-3) nm: 414 (611), 539 (29).APCI-MS Found: [M]+ 676.16; ?C44H28CuN4? requires [M]+ 676.26.

The chemical industry reduces the impact on the environment during synthesis,6046-93-1,Copper(II) acetate hydrate,I believe this compound will play a more active role in future production and life.

Reference£º
Article; Ol’shevskaya, Valentina A.; Alpatova, Viktoriya M.; Radchenko, Alexandra S.; Ramonova, Alla A.; Petrova, Albina S.; Tatarskiy, Victor V.; Zaitsev, Andrei V.; Kononova, Elena G.; Ikonnikov, Nikolay S.; Kostyukov, Alexey A.; Egorov, Anton E.; Moisenovich, Mikhail M.; Kuzmin, Vladimir A.; Bragina, Natalya A.; Shtil, Alexander A.; Dyes and Pigments; vol. 171; (2019);,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belongs to copper-catalyst compound, name is Copper(II) acetate, and cas is 142-71-2, its synthesis route is as follows.

To a 250 mL round bottom flask equipped with a reflux condenser was charged 1.000 g (1.6 mmol) of 5,10,15,20-tetraphenylporphyrin and 100 ml of N, N-dimethylformamide (DMF) , Heated to reflux (about 154 ), until it is completely dissolved,A solution of 650 g (3.2 mmol) of copper acetate in 50 mL of DMF was added thereto, followed by reaction at 150 C using thin layer chromatography (developing solvent in a 1: 1 by volume mixture of chloroform and petroleum ether) After about 0.5 hours of reaction, the raw material point disappears and the reaction is complete. The reaction solution is poured into 100 mL of ice water while hot, allowed to stand for 30 min and then filtered. The solid is washed with ethanol and washed to the filtrate. The crude product was dried in a vacuum. The product was 1.010 g, yield 93.5%.

142-71-2, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,142-71-2 ,Copper(II) acetate, other downstream synthetic routes, hurry up and to see

Reference£º
Patent; Wuhan Institute of Technology; Gao, Hong; Wang, Huidong; Chen, Chujun; Huang, Qihao; (17 pag.)CN106366086; (2017); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Name is Copper(I) bromide, as a common heterocyclic compound, it belongs to copper-catalyst compound, and cas is 7787-70-4, its synthesis route is as follows.

General procedure: To a dry and degassed dichloromethane (10mL) solution of 2,2?-dipyridylamine (1mmol) was added CuX (1mmol). The mixture was kept stirring under nitrogen at ambient temperature. After 1h, a yellow precipitate was formed. To the resulting suspension was added dropwise with stirring a solution of triphenylphosphine (1mmol) in dichloromethane (5mL). The mixture was stirred for another 4h, and then the solvent was evaporated to give a white or yellow residue. The solid residue was extracted with 10mL absolute dichloromethane under the nitrogen atmosphere while the extract was filtered and transferred to a nitrogen-protected flask. 10mL hexane was layered above the resulting solution afforded crystals of the complexes, which were washed with hexane.

7787-70-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,7787-70-4 ,Copper(I) bromide, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Wu, Fengshou; Tong, Hongbo; Wang, Kai; Wang, Zheng; Li, Zaoying; Zhu, Xunjin; Wong, Wai-Yeung; Wong, Wai-Kwok; Journal of Photochemistry and Photobiology A: Chemistry; vol. 318; (2016); p. 97 – 103;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7787-70-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Copper(I) bromide, cas is 7787-70-4,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A solution of cuprous chloride (5.8 mg, 0.058 mmol) in acetonitrile(10 mL) was added dropwise to a well stirred solution of 1(30 mg, 0.058 mmol) in dichloromethane (10 mL) at room temperaturewith constant stirring. After stirring for 6 h, the solvent wasremoved under reduced pressure and the residue obtained wasfurther washed with petroleum ether to give 4 as white solid product.Yield

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Copper(I) bromide, 7787-70-4

Reference£º
Article; Bhat, Sajad A.; Mague, Joel T.; Balakrishna, Maravanji S.; Inorganica Chimica Acta; vol. 443; (2016); p. 243 – 250;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7787-70-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Copper(I) bromide, cas is 7787-70-4,the copper-catalyst compound, it is a common compound, a new synthetic route is introduced below.

Example 1 2-(Carboxy-5-nitro-phenyl)malonic acid dimethyl ester A solution of 2-chloro-4-nitrobenzoic acid (75g, 372mmol) in dimethyl malonate (900mL, 20 equivalents) was degassed with nitrogen for 15min. Copper (I) bromide (5.4g, 37mmol) was added in one portion. Sodium methoxide (48.3g, 894mmol) was added in one portion to the solution while stirring and the contents exothermed to 48C. Fifteen minutes later, the contents were heated to 70C for 24hrs. The reaction was complete by nmr. Water (900mL) was added to the cooled reaction followed by hexanes (900mL). The aqueous layer was separated, toluene (900mL) added, the solution filtered through Celite, and the aqueous layer separated. Fresh toluene (1800mL) was added to the aqueous layer and the biphasic mixture acidified with 6 N aqueous HCI (90mL). A white precipitate formed and the contents were stirred for 18hrs. The product was filtered off and dried to give a white solid, 78.1g (70%, mp 153C). IR 2923, 2853, 1750, 1728, 1705, 1458, 1376, 1352, 1305, 1261 cm-1. 1H NMR (CD3)2SO delta8.37 (d, J = 2 Hz, 1H), 8.30 (d, J = 1Hz, 2H), 5.82 (s, 1H), 3.83 (s, 6H). 13C NMR (CD3)2SO delta168.0, 167.3, 149.4, 137.1, 135.8, 132.5, 125.4, 123.7, 54.5, 53.4. Anal. Calcd for C11H10NO8: C, 48.49; H, 3.73; N, 4.71. Found: C, 48.27; H, 3.72; N, 4.76.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Copper(I) bromide, 7787-70-4

Reference£º
Patent; PFIZER INC.; EP887345; (1998); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

Name is Copper(I) bromide, as a common heterocyclic compound, it belongs to copper-catalyst compound, and cas is 7787-70-4, its synthesis route is as follows.

CuBr (0.2 g, 1.39 mmol) wasdissolved in a mixture of dichloromethane (30 ml) and acetonitrile (30 ml) and then 2-benzylpyridine (0.23 g, 1.39 mmol)dissolved in dichloromethane (20 ml) was added. The mixture was stirred for 2 h at room temperature and allowed to standovernight. The next day the colour of the solution was green indicating the oxidation of Cu(I) to Cu(II) and the green solidwas filtered off and recrystallized from methanol. Yield (70%).

7787-70-4, In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles.,7787-70-4 ,Copper(I) bromide, other downstream synthetic routes, hurry up and to see

Reference£º
Article; Aguirrechu-Comeron; Pasan; Gonzalez-Platas; Ferrando-Soria; Hernandez-Molina; Journal of Structural Chemistry; vol. 56; 8; (2015); p. 1563 – 1571; Zh. Strukt. Kim.; vol. 56; 8; (2015); p. 1624 – 1632;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”