Tag: M.W:100-200

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7787-70-4,Copper(I) bromide,as a common compound, the synthetic route is as follows.

7787-70-4, Complex 2 was obtained by a similar method as described for 1 using copper(I) bromide (0.032 g,0.22 mmol) in place of copper(I) iodide. Colorless crystals of 2 were obtained (Yield: 0.191 g, 90.3%). 1HNMR (400 M, CDCl3) delta: 7.51-7.36 (m, 22H, m,p-Ph + H3,H4-PC6H4-), 7.33-7.27 (m, 4H, H5,H6-PC6H4-),7.12-7.00 (m, 12H, o-Ph). 13C NMR (100 M, CDCl3) delta: 147.87, 147.67, 140.24, 140.16, 134.31, 134.17, 133.45,131.80, 131.07, 130.71, 130.14, 129.90, 128.93, 128.69, 127.93, 127.26 (Ar-C). 31P NMR (240 M, CDCl3) delta:-9.70 (s). Anal. Calcd for C48H38Cu2Br2P2: C, 59.83; H, 3.97. Found: C, 59.88; H, 3.97. MS (MALDI-TOF): m/zCalcd for [M-2Br-Cu + C24H19P]+, 739.1745, found 739.1747.

The synthetic route of 7787-70-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Qi, Lei; Li, Qian; Hong, Xiao; Liu, Li; Zhong, Xin-Xin; Chen, Qiao; Li, Fa-Bao; Liu, Qian; Qin, Hai-Mei; Wong, Wai-Yeung; Journal of Coordination Chemistry; vol. 69; 24; (2016); p. 3692 – 3702;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

A common heterocyclic compound, the copper-catalyst compound, name is Copper(I) bromide,cas is 7787-70-4, mainly used in chemical industry, its synthesis route is as follows.,7787-70-4

General procedure: A mixture of CuCl (19.6mg, 0.2mmol) and dppb (89.3mg, 0.2mmol) with an excess of batho (66.5mg, 0.2mmol) were dissolved in CH2Cl2 (5mL) and 17 CH3OH (5mL) solution, stirred at room temperature for 6h. The insoluble residues were removed by filtration, and the filtrate was evaporated slowly at room temperature to yield yellow crystalline products.

As the rapid development of chemical substances, we look forward to future research findings about 7787-70-4

Reference£º
Article; Yu, Xiao; Fan, Weiwei; Wang, Guo; Lin, Sen; Li, Zhongfeng; Liu, Min; Yang, Yuping; Xin, Xiulan; Jin, Qionghua; Polyhedron; vol. 157; (2019); p. 301 – 309;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7787-70-4,7787-70-4, Copper(I) bromide is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: CuI (0.095 g, 0.05 mmol) and PPh3 (0.262 g, 0.10 mmol) in 10 ml of MeCN were stirred for 1 h at 80 C to get a clear solution. To the reaction mixture, a solution of Hnor (0.082 g, 0.05 mmol) in methanol (5 mL) was added dropwise and left on stirring for 4 h. Then the mixture was filtered, and a colorless clear solution was obtained, which was left for slow evaporation leading to crystallization at room temperature. After a few days white crystals were obtained that were suitable for a single-crystal X-ray diffraction analysis.

7787-70-4 Copper(I) bromide 24593, acopper-catalyst compound, is more and more widely used in various fields.

Reference£º
Article; Khan, Rais Ahmad; Dielmann, Fabian; Liu, Xue; Hahn, F. Ekkehardt; Al-Farhan, Khalid; Alsalme, Ali; Reedijk, Jan; Polyhedron; vol. 111; (2016); p. 173 – 178;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7787-70-4,Copper(I) bromide,as a common compound, the synthetic route is as follows.

7787-70-4, a. 2-(carboxy-5-nitro-phenyl)malonic acid dimethyl ester (2) A solution of 2-chloro-4-nitrobenzoic acid (75g, 372mmol) in dimethyl malonate (900mL) was sparged with nitrogen for 15 min. Sodium methoxide (48.3g, 894mmol) was added in one portion and the contents exothermed to 48C. Fifteen minutes later, copper (I) bromide (5.4g, 37mmol) was added in one portion and the contents heated to 70C for 24 hrs. The reaction was 70% complete by nmr, the contents heated to 85C for 5 hrs to completely consume the 2-chloro-4-nitrobenzoic. Water (900mL) was added to the cooled reaction followed by hexanes (900mL). The aqueous layer was separated, toluene (900mL) added, filtered through celite, and aqueous layer separated. Fresh toluene (1800mL) was added to the aqueous layer and the biphasic mixture acidified with 6N aqueous HCl (90mL). A white precipitate formed and the contents stirred for 18 hrs. The product was filtered off and dried to give a white solid (78.1g, 70%) mp=153C. 1H NMR (CD3)2SO delta 8.37 (d, J = 2 Hz, 1H), 8.30 (d, J = 1Hz, 2H), 5.82 (s, 1H), 3.83 (s, 6H). 13C NMR (CD3)2SO delta 168.0, 167.3, 149.4, 137.1, 135.8, 132.5, 125.4, 123.7, 54.5, 53.4. Anal. Calcd for C11H10NO8: C, 48.49; H, 3.73; N, 4.71. Found: C, 48.27; H, 3.72; N, 4.76.

The synthetic route of 7787-70-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; PFIZER INC.; EP1181954; (2002); A2;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7787-70-4,Copper(I) bromide,as a common compound, the synthetic route is as follows.

7787-70-4, A mixture of PLN(37.6 mg, 0.2 mmol) containing CH3ONa (11.8 mg, 0.22 mmol) andCuBr (22 mg, 0.2 mmol) in methanolic solution (10 mL) was refluxed for 2 h, followed by addition of 1,10-phenanthroline (36 mg,0.2 mmol) in methanol (10 mL). The mixture was stirred for another 30 min at room temperature to give a dark-red solution and then filtered.The filtrate was kept in air for a week, forming dark-red block crystals. The crystals were isolated, washed three times with distilled water and dried in a vacuum desiccator containing anhydrous CaCl2. Yield: 87.9 mg (81%). Anal. Calcd for C24H19BrCuN2O4 (542.86): C,53.10; H, 3.52 and N, 5.16. Found: C, 53.12; H, 3.53 and N, 5.17. IR(KBr, cm-1): 3500, 3041, 1986, 1837, 1628, 1590, 1568, 1510, 1418,1344, 1196, 1159, 1106, 993, 855, 773, 720, 672, 631, 551, 548, 528,468, 455, 430.

The synthetic route of 7787-70-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Gou, Yi; Zhang, Zhan; Qi, Jinxu; Liang, Shichu; Zhou, Zuping; Yang, Feng; Liang, Hong; Journal of Inorganic Biochemistry; vol. 153; (2015); p. 13 – 22;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO442,mainly used in chemical industry, its synthesis route is as follows.,7787-70-4

a. 2-(carboxy-5-nitro-phenyl)malonic acid dimethyl ester (2) A solution of 2-chloro-4-nitrobenzoic acid (75 g, 372 mmol) in dimethyl malonate (900 mL) was sparged with nitrogen for 15 min. Sodium methoxide (48.3 g, 894 mmol) was added in one portion and the contents exothermed to 480 C. Fifteen minutes later, copper (I) bromide (5.4 g, 37 mmol) was added in one portion and the contents heated to 70 C. for 24 hrs. The reaction was 70% complete by nmr, the contents heated to 85 C. for 6 hrs to completely consume the 2-chloro-4-nitrobenzoic. Water (900 mL) was added to the cooled reaction followed by hexanes (900 mL). The aqueous layer was separated, toluene (900 mL) added, filtered through celite, and aqueous layer separated. Fresh toluene (1800 mL) was added to the aqueous layer and the biphasic mixture acidified with 6N aqueous HCl (90 mL). A white precipitate formed and the contents stirred for 18 hrs. The product was filtered off and dried to give a white soid (78.1 g, 70%) mp=153 C. 1 H NMR (CD3)2 SO delta 78.37 (d, J=2 Hz, 1H), 8.30 (d, J=1 Hz, 2H), 5.82 (s, 1H), (3.83 (s, 6H). 13 C NMR (CD3)2 SO delta 168.0, 167.3, 149.4, 137.1, 135.8, 132.5, 125.4, 123.7, 54.5, 53.4. Anal. Calcd for C11 H10 NO8: C, 48.49; H, 3.73; N, 4.71. Found: C, 48.27; H. 3.72; N, 4.76.

With the synthetic route has been constantly updated, we look forward to future research findings about Copper(I) bromide,belong copper-catalyst compound

Reference£º
Patent; Pfizer INc.; US5919795; (1999); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO365,mainly used in chemical industry, its synthesis route is as follows.,7787-70-4

A solution of (4-diphenylphosphino)phenanthridine (0.023 g,0.063 mmol) in CH2Cl2 (3 mL) was added drop-wise to a suspensionof CuBr (0.089 g, 0.063 mmol) in CH2Cl2 (3 mL) with constantstirring. The reaction mixture was stirred for overnight at roomtemperature. Then the reaction mixture was filtered through smallplug of Celite and dried under vacuum to give an orange solid.Yield = 0.022 g (71%).

With the synthetic route has been constantly updated, we look forward to future research findings about Copper(I) bromide,belong copper-catalyst compound

Reference£º
Article; Mondal, Rajarshi; Giesbrecht, Patrick K.; Herbert, David E.; Polyhedron; vol. 108; (2016); p. 156 – 162;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belong copper-catalyst compound,Copper(I) bromide,7787-70-4,Molecular formula: BrCu,mainly used in chemical industry, its synthesis route is as follows.,7787-70-4

Direct route A round-bottomed flask equipped with a stirring bar was charged with the ligand, SSBn (0.1503g; 0.383mmol) and acetonitrile (10mL) to give a white milky suspension. Anhydrous CuBr (0.0555g, 0.38mmol) was added in one portion under vigourous stirring to give a white suspension which became briefly transparent after a few minutes. The mixture was stirred overnight to give an off-white precipitate; it was sonicated for a few seconds and further stirred for 30min. Diethyl ether (10mL) was added and stirring was continued for 5min to give the product as a white powder which was filtered, washed with diethyl ether (5mL) and dried in air (0.1802g, 0.334mmol, 88%).Sulfur insertion route [CuBr(CSBn)]2 (103mg, 0.102mmol) was partially dissolved in acetonitrile (20mL) in a Schlenk flask. To this was added an excess of sulfur (66mg, 2mmol per sulfur). The mixture was stirred at 70C for 5h after which time the mixture was diluted with 10mL of acetonitrile and filtered. The residue was extracted with acetonitrile (2¡Á10mL). The solvent of the combined organic phases was removed by oil pump vacuum and the off-white solid dried under reduced pressure. Yield=72.6mg (0.135mmol, 66%). 1H NMR (300MHz, DMSO-d6): delta=5.22 (s, 4H, PhCH2), 6.66 (s, 2H, NCH2N), 7.32 (s, 10H, 2¡Á C6H5), 7.50 (overlapping signal, 2H, CH=CH), 7.70 (overlapping signal, 2H, CH=CH). 13C{1H} NMR (DMSO-d6, 100MHz) delta 50.3 (CH2Ph), 56.2 (NCH2N), 118.9 (CHCH), 119.2 (CHCH), 127.9 (overlapping, m/p-C6H5), 128.6 (o-C6H5), 135.9 (i-C6H5), 159.4 (C=S). IR (cm-1): 3390.3, 3092.1, 1569.7, 1495.9, 1451.8, 1408.1, 1231.2, 1190.4, 959.6, 704.5, 671.6. MS (ESI+), m/z 991 [Cu2(SSBn)2Br]+, 847 [Cu(SSBn)2]+, 455. [Cu(SSBn)]+. Elemental analysis: Calc. for C21H20BrCuN4S2: C: 47.06; H: 3.76; N: 10.45. Found: C: 46.96; H: 3.81; N: 10.40.

With the synthetic route has been constantly updated, we look forward to future research findings about Copper(I) bromide,belong copper-catalyst compound

Reference£º
Article; Slivarichova, Miriam; Correa ?da Costa, Rosenildo; Nunn, Joshua; Ahmad, Ruua; Haddow, Mairi F.; Sparkes, Hazel A.; Gray, Thomas; Owen, Gareth R.; Journal of Organometallic Chemistry; vol. 847; (2017); p. 224 – 233;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7787-70-4,Copper(I) bromide,as a common compound, the synthetic route is as follows.

7787-70-4, General procedure: A suspension of copper(I) iodide (0.190 g, 1.0 mmol) and dppc (0.534 g, 1.0 mmol) in20 mL of CH2Cl2 was stirred for 6 h at room temperature to form a light-yellow precipitate.The precipitate was filtered off and purified by recrystallization from CH2Cl2/ethanolto give yellow crystals (Yield: 0.618 g, 85.3%).

The synthetic route of 7787-70-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Li, Qian; Wei, Qiong; Xie, Pei; Liu, Li; Zhong, Xin-Xin; Li, Fa-Bao; Zhu, Nian-Yong; Wong, Wai-Yeung; Chan, Wesley Ting-Kwok; Qin, Hai-Mei; Alharbi, Njud S.; Journal of Coordination Chemistry; vol. 71; 24; (2018); p. 4072 – 4085;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

7787-70-4,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7787-70-4,Copper(I) bromide,as a common compound, the synthetic route is as follows.

A dry and Ar-flushed Schlenk flask was charged with P(OEt)3 (5.2 mL, 30.0 mmol) in benzene (30 mL). CuBr (4.3 g, 30.0 mmol) was added. After the mixture had stirred at r.t. for 1 h and at 80 C for 1 h, unsolved solid was removed by filtration under Ar atmosphere and solvents were evaporated from the filtrate. The resulted mixture was cooled down to -78 C and was washed with n-hexane (2*). The remained solid was dried under vacuum; this gave CuBr*P(OEt)3. Yield: 6.8 g (73%); a mixture of oil and solid.

7787-70-4 Copper(I) bromide 24593, acopper-catalyst compound, is more and more widely used in various fields.

Reference£º
Article; Moriya, Kohei; Schwaerzer, Kuno; Karaghiosoff, Konstantin; Knochel, Paul; Synthesis; vol. 48; 19; (2016); p. 3141 – 3154;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”