Tag: M.W:300-400

As a common heterocyclic compound, it belongs to copper-catalyst compound, name is Copper(II) trifluoromethanesulfonate, and cas is 34946-82-2, its synthesis route is as follows.,34946-82-2

General procedure: The solution of CuX2 salt (0.5 mmol, 120.8 mg of Cu(NO3)23H2Ofor 3a/b and 180.8 mg of Cu(CF3SO3)2 for 4) in 5.0 mL of ethanol (3aand 4) or methanol (3b) was mixed with the solution of anequimolar amount of 1,7-phen (90.1 mg) in 5.0 mL of ethanol (3aand 4) or methanol (3b). After addition of 1,7-phen, a solutionchanged color from blue to green, and no formation of metalliccopper was observed. The reaction mixture was stirred at roomtemperature for 3-4 h and then left at room temperature to slowlyevaporate. Crystals of compounds 3a/b were obtained from themother solution, while those of compound 4 were obtained after recrystallization of the solid product formed from the reactionmixture in 15.0 mL of acetonitrile. These crystals were filtered offand dried at ambient temperature. Yield (calculated on the basisof 1,7-phen): 65.7 mg (54%) for 3a, 74.2 mg (61%) for 3b and94.1 mg (57%) for 4.

With the complex challenges of chemical substances, we look forward to future research findings about 34946-82-2,belong copper-catalyst compound

Reference£º
Article; Stevanovi?, Nevena Lj.; Andrejevi?, Tina P.; Crochet, Aurelien; Ilic-Tomic, Tatjana; Dra?kovi?, Nenad S.; Nikodinovic-Runic, Jasmina; Fromm, Katharina M.; Djuran, Milo? I.; Gli?i?, Biljana ?.; Polyhedron; vol. 173; (2019);,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belongs to copper-catalyst compound, name is Copper(II) trifluoromethanesulfonate, and cas is 34946-82-2, its synthesis route is as follows.,34946-82-2

The molar ratio of Cu (CF3SO3) 2 and 4- (3- (4H-1,2,4-triazol-4-yl) phenyl) -4H-1,2,4-triazole (L)(0.0624 g, 0.2 mmol), Cu (CF3SO3) 2 (0.0691 g, 0.2 mmol), H2O (6 mL), 1:CH3CN (4 mL). After three days of hydrothermal treatment at 100 oC, the solution was slowly cooled to room temperature. After opening the kettle for the X-ray single crystal diffraction analysis of the yellow rod-like crystals. Yield: 35% (based on L).

With the complex challenges of chemical substances, we look forward to future research findings about 34946-82-2,belong copper-catalyst compound

Reference£º
Patent; Tianjin Normal University; Wang, Ying; (12 pag.)CN104513260; (2016); B;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

34946-82-2, Copper(II) trifluoromethanesulfonate is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A solution of Cu(OTf)2 (90.0 mg, 0.249 mM) in methanol was added to a solution of HLpz (53.5 mg, 0.250 mM) and triethylamine (25.0 mg, 0.250 mM) in methanol, affording a dark green solution. A solution of NaN3 (16.3 mg, 0.250 mM) was then layered on the above solution from which blue crystals of 3 suitable for X-ray analysis were obtained (55 mg, 69% yield). Anal. Calcd for C11H9CuN7O: C,41.44; H, 2.85; N, 30.76. Found: C, 40.56; H, 2.77; N, 30.18. UV-vis (CH3OH) [lambdamax, nm(epsilon, M-1 cm-1)]: 354 (5000), 646 (290). FTIR (KBr): 3430, 2055, 1640, 1376, 1164, 1050,866, 769, 660 cm-1. EPR (9.450 GHz, Mod. Amp. 5.0 G, CH3OH, 77 K): g|| = 2.248,g? 2:037, and A|| = 165 G. ESI-MS (MeOH): m/z = 341 [Cu(Lpz)N3 + Na]+, 659{[Cu(Lpz)N3]2 + Na}+, 977 {[Cu(Lpz)N3]3 + Na}+.

34946-82-2, 34946-82-2 Copper(II) trifluoromethanesulfonate 2734996, acopper-catalyst compound, is more and more widely used in various fields.

Reference£º
Article; Houser, Robert P.; Wang, Zhaodong; Powell, Douglas R.; Hubin, Timothy J.; Journal of Coordination Chemistry; vol. 66; 23; (2013); p. 4080 – 4092;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belong copper-catalyst compound,Copper(II) trifluoromethanesulfonate,34946-82-2,Molecular formula: C2CuF6O6S2,mainly used in chemical industry, its synthesis route is as follows.,34946-82-2

The ligand (75.9 mg, 0.12 mmol) was dissolved in THF (4 ml) and added to a suspension of sodium hydride (11.8 mg, 0.49 mmol) in THF (2 ml) at 0 C. The resulting yellow mixture was stirred at 0 C for 1 h and at r. t. for 2 h. Afterwards the solution was added dropwise to a solution of copper(II) triflate (44.3 mg, 0.12 mmol) in THF (2 ml). The dark brown solution was stirred at r. t. for 16 h. After filtration the solvent was removed in vacuo and the brown solid purified by recrystallisation from dichloromethane and pentane. 6: 60.8 mg, 60.9%. C41H36N5O5SF3Cu¡¤3CH2Cl2: Anal. Calc. C, 46.35; H, 4.24; N, 6.14. Found: C, 46.70; H, 4.12; N, 6.19%. HR-MS: C40H36N5O2Cu Calc. 681.2159. Found: 681.2148 (100.0), IR: nunu [cm-1]=3060, 2929, 2855, 1640, 1592, 1530, 1444, 1262, 1174, 1097, 1044, 879, 646.

With the synthetic route has been constantly updated, we look forward to future research findings about Copper(II) trifluoromethanesulfonate,belong copper-catalyst compound

Reference£º
Article; Sauer, Desiree C.; Wadepohl, Hubert; Polyhedron; vol. 81; (2014); p. 180 – 187;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.34946-82-2,Copper(II) trifluoromethanesulfonate,as a common compound, the synthetic route is as follows.

General procedure: A mixture of ligand L (23.1 mg, 55 mumol) and appropriate metalsalt (55 mumol) in nitromethane (20 mL) was stirred at room temperaturefor 48 h under the normal atmosphere. The complexeswere isolated as a solids by evaporation of the solvent and followedby a dissolution of the residue in the minimum volume of CH3CNand precipitation of the complexes by the gradual addition ofether. Obtained solids were filtered off and dried in air., 34946-82-2

As the paragraph descriping shows that 34946-82-2 is playing an increasingly important role.

Reference£º
Article; Wa??sa-Chorab, Monika; Marcinkowski, Dawid; Kubicki, Maciej; Hnatejko, Zbigniew; Patroniak, Violetta; Polyhedron; vol. 118; (2016); p. 1 – 5;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO350,mainly used in chemical industry, its synthesis route is as follows.,34946-82-2

Was added to the Schlenk tube Cu(OTf)2 (0.01mmol), ligand (Ra,S,S)-I-Ph (0.01mmol) N2 protection, the solvent was added CHCl3(2 mL), stirred at room temperature for 4 hours ligand, and concentrated under reduced pressure, vacuum drained, i.e., quantitative complex to give [(Ra,S,S)-I-Ph]Cu(OTf)2.

With the synthetic route has been constantly updated, we look forward to future research findings about Copper(II) trifluoromethanesulfonate,belong copper-catalyst compound

Reference£º
Patent; Zhejiang University; Lin Xufeng; Gu Haorui; Sun Weiye; (21 pag.)CN108794420; (2018); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

34946-82-2, Copper(II) trifluoromethanesulfonate is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

The copper(II) complexes with terpy ligand, [Cu(terpy)(ClO4)2(H2O)] (1) and [Cu(terpy)2](CF3SO3)2¡¤2H2O (2), were synthesized by modification of a previously described method for the preparation of [Cu(terpy)(H2O)](CF3SO3)2 complex [42]. The solution of 1.0mmol of terpy (233.3mg) in 2.0mL of methanol for 1 and ethanol for 2 was added slowly under stirring to the solution containing 1.0mmol of the corresponding copper(II) salt (370.5mg of Cu(ClO4)2¡¤6H2O (1) and 361.7mg of Cu(CF3SO3)2 (2)) in 5.0mL of water. The reaction mixture was stirred at room temperature for 3h. The blue crystals of 1 and 2 suitable for single-crystal X-ray analysis were grown by slow evaporation of the resulting solutions at room temperature. These crystals were filtered off and dried at ambient temperature. The yield (calculated on the basis of terpy) was 73% (375.0mg) for 1 and 78% (337.1mg) for 2.

34946-82-2, The synthetic route of 34946-82-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Gli?i?, Biljana ?.; Nikodinovic-Runic, Jasmina; Ilic-Tomic, Tatjana; Wadepohl, Hubert; Veselinovi?, Aleksandar; Opsenica, Igor M.; Djuran, Milo? I.; Polyhedron; vol. 139; (2018); p. 313 – 322;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belong copper-catalyst compound,Copper(II) trifluoromethanesulfonate,34946-82-2,Molecular formula: C2CuF6O6S2,mainly used in chemical industry, its synthesis route is as follows.,34946-82-2

A solution of Cu(OTf )2 (0.089 g, 0.25 mmol) in 1 mL of CH3CN was added to a stirred solution of 2-pina (0.050 g, 0.25 mmol) in 1 mL of CH3CN. The blue suspension was stirred for 1.5 h and the solvent was removed under reduced pressure. The resulting blue solid was washed with Et2O (5 mL ¡Á 3). Dissolving the product in DMF and vapor diffusion of Et2O into the blue solution at room temperature led to green crystals suitable for X-ray crystallographic characterization (0.095 g, 54% yield). Anal. Calcd for C19H23N5O9F6S2Cu: C, 32.28; H, 3.28; N, 9.90. Found: C, 31.96; H, 3.03; N, 10.15. FT-IR (cm-1): 1644, 1619, 1546, 1457, 1431, 1386, 1369, 1243, 1223, 1147, 1106, 1028, 862, 759, 698, 667, 634, 572, 516, 418.

With the synthetic route has been constantly updated, we look forward to future research findings about Copper(II) trifluoromethanesulfonate,belong copper-catalyst compound

Reference£º
Article; McMoran, Ethan P.; Mugenzi, Clement; Fournier, Kyle; Draganjac, Mark; Tony, Donavon; Jeong, Kwangkook; Powell, Douglas R.; Yang, Lei; Journal of Coordination Chemistry; vol. 69; 3; (2016); p. 375 – 388;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

34946-82-2, Copper(II) trifluoromethanesulfonate is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Was added to the Schlenk tube Cu(OTf)2 (0.01mmol), ligand (Ra,S,S)-I-Ph (0.01mmol) N2 protection, the solvent was added CHCl3(2 mL), stirred at room temperature for 4 hours ligand, and concentrated under reduced pressure, vacuum drained, i.e., quantitative complex to give [(Ra,S,S)-I-Ph]Cu(OTf)2.

34946-82-2, As the paragraph descriping shows that 34946-82-2 is playing an increasingly important role.

Reference£º
Patent; Zhejiang University; Lin Xufeng; Gu Haorui; Sun Weiye; (21 pag.)CN108794420; (2018); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belongs to quinuclidine compound,Quinuclidine-4-carboxylic acid hydrochloride,40117-63-3,Molecular formula: C8H14ClNO294,mainly used in chemical industry, its synthesis route is as follows.,34946-82-2

To a solution ofTX-CH2COOH (1 g, 3.7 mmol) in distilled water (50 mL), was addedNaOH (148 mg, 3.7 mmol) to give sodium thioxanthone carboxylate (Na+TX-CH2COO-). Tothis solution Cu(OTf)2 (670 mg, 1.85 mmol) was added upon whichCu(TX)2 formed as a green precipitate. The resultant was separatedby filtration and dried in vacuo to obtain a greensolid. Yield 62%. Elementalanalysis; Calculated: C 66.90%; H 3.37%; O 17.82%; S 11.91%. Found: C 61.13%, H4.75%, O 18.97, S 14.25%. Melting point: 232 C.

With the synthetic route has been constantly updated, we look forward to future research findings about Copper(II) trifluoromethanesulfonate,belong copper-catalyst compound

Reference£º
Article; Dadashi-Silab, Sajjad; Yagci, Yusuf; Tetrahedron Letters; vol. 56; 46; (2015); p. 6440 – 6443;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”