Some scientific research about Copper(II) trifluoromethanesulfonate

34946-82-2, The synthetic route of 34946-82-2 has been constantly updated, and we look forward to future research findings.

34946-82-2, Copper(II) trifluoromethanesulfonate is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

In a 20 mL vial with heating, anhydrous copper(II) trifluoromethanesulfonate(221 mg, 0.61 mmol) was dissolved in 15 mL of90% EtOH. After cooling to room temperature, HL1 (200 mg,0.61 mmol) was added to the pale blue solution, which became bluegreen.The mixture was heated to boiling to ensure all reactants weredissolved, and then cooled to room temperature, at which point thesolution was green-blue and contained a teal precipitate. The precipitatewas isolated via gravity filtration as a bright teal powder (256 mg, 71%). HR-MS (ESI, MeOH) m/z: [L1Cu]+ Calcd. for[CuC20H12N3O2]+ 389.0226; found 388.9763; m/z [L1CuII(EtOH)]+Calcd. for [CuC32H18N3O3]+ 435.0644; found 435.0132 (Fig. S4). Anal.Calc. for CuC21H14N3O6SF3: C, 45.29; H, 2.53; N, 7.54. Found: C, 45.06;H, 2.74; N, 8.09. X-ray quality crystals in the form of teal blocks weregrown upon slow diffusion of anhydrous THF into a concentrated solutionof the compound in EtOH at room temperature.

34946-82-2, The synthetic route of 34946-82-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Elwell, Courtney E.; Neisen, Benjamin D.; Tolman, William B.; Inorganica Chimica Acta; vol. 485; (2019); p. 131 – 139;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

New downstream synthetic route of Copper(II) trifluoromethanesulfonate

34946-82-2 is used more and more widely, we look forward to future research findings about Copper(II) trifluoromethanesulfonate

As a common heterocyclic compound, it belongs to copper-catalyst compound, name is Copper(II) trifluoromethanesulfonate, and cas is 34946-82-2, its synthesis route is as follows.,34946-82-2

L (0.0424 g, 0.2 mmol), Cu (CF3SO3)2(0.0691g,0.2mmol)H2O (6 mL), CH3CN (4 mL), water and heat 100Oslow C down to room temperature after three days.After opening the autoclave there for X- ray diffraction analysis of the yellow rod-like crystals.Yield: 35%

34946-82-2 is used more and more widely, we look forward to future research findings about Copper(II) trifluoromethanesulfonate

Reference£º
Patent; Tianjin Normal University; Wang, Ying; (10 pag.)CN104557986; (2016); B;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

Share a compound : Copper(II) trifluoromethanesulfonate

As the rapid development of chemical substances, we look forward to future research findings about 34946-82-2

The copper-catalyst compound, name is Copper(II) trifluoromethanesulfonate,cas is 34946-82-2, mainly used in chemical industry, its synthesis route is as follows.,34946-82-2

The molar ratio of Cu (CF3SO3) 2 and 4- (3- (4H-1,2,4-triazol-4-yl) phenyl) -4H-1,2,4-triazole) (L)For 1: 1;L (0.0424 g, 0.2 mmol), Cu (CF3SO3) 2 (0.0691 g, 0.2 mmol), H2O (6 mL)CH3CN (4 mL), water heat 100 oC three days later slowly to room temperature.After the opening, there are yellow rod-like crystals suitable for X-ray single crystal diffraction analysis. Yield: 35% (based on L calculation).

As the rapid development of chemical substances, we look forward to future research findings about 34946-82-2

Reference£º
Patent; Tianjin Normal University; Wang, Ying; (11 pag.)CN104557984; (2017); B;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

A new synthetic route of Copper(II) trifluoromethanesulfonate

With the complex challenges of chemical substances, we look forward to future research findings about 34946-82-2,belong copper-catalyst compound

As a common heterocyclic compound, it belongs to copper-catalyst compound, name is Copper(II) trifluoromethanesulfonate, and cas is 34946-82-2, its synthesis route is as follows.,34946-82-2

General procedure: The solution of CuX2 salt (0.5 mmol, 120.8 mg of Cu(NO3)23H2Ofor 3a/b and 180.8 mg of Cu(CF3SO3)2 for 4) in 5.0 mL of ethanol (3aand 4) or methanol (3b) was mixed with the solution of anequimolar amount of 1,7-phen (90.1 mg) in 5.0 mL of ethanol (3aand 4) or methanol (3b). After addition of 1,7-phen, a solutionchanged color from blue to green, and no formation of metalliccopper was observed. The reaction mixture was stirred at roomtemperature for 3-4 h and then left at room temperature to slowlyevaporate. Crystals of compounds 3a/b were obtained from themother solution, while those of compound 4 were obtained after recrystallization of the solid product formed from the reactionmixture in 15.0 mL of acetonitrile. These crystals were filtered offand dried at ambient temperature. Yield (calculated on the basisof 1,7-phen): 65.7 mg (54%) for 3a, 74.2 mg (61%) for 3b and94.1 mg (57%) for 4.

With the complex challenges of chemical substances, we look forward to future research findings about 34946-82-2,belong copper-catalyst compound

Reference£º
Article; Stevanovi?, Nevena Lj.; Andrejevi?, Tina P.; Crochet, Aurelien; Ilic-Tomic, Tatjana; Dra?kovi?, Nenad S.; Nikodinovic-Runic, Jasmina; Fromm, Katharina M.; Djuran, Milo? I.; Gli?i?, Biljana ?.; Polyhedron; vol. 173; (2019);,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

Share a compound : Copper(II) trifluoromethanesulfonate

As the rapid development of chemical substances, we look forward to future research findings about 34946-82-2

The copper-catalyst compound, cas is 34946-82-2 name is Copper(II) trifluoromethanesulfonate, mainly used in chemical industry, its synthesis route is as follows.,34946-82-2

A saturated solution of Cu(OTf)2 in n-butanol was addeddrop by drop to a solution of ligand L5 (40 mg, 0.16 mmol) in n-butanol (3 mL). Diethyl ether was placed on top of theblue butanol layer. After several weeks, deep blue crystalplatelets separated which were isolated by filtration withsuction, washed with a small volume of diethyl ether anddried at air. Yield: 64 mg (91); M.p. 271-275C. – IR (KBr): = 3322 br, 3154 w br, 3063 w, 1641 m, 1613 s, 1453 m, 1284vs, 1256 vs, 1225 vs, 1167 s, 1032 vs, 759 m, 700 s, 639 vs,576 m, 518 m cm-1. – Anal. for C28H30CuF6N10O6S2 (844.27):calcd. C 39.83, H 3.58, N 16.59; found C 40.07, H 3.74, N 16.16.

As the rapid development of chemical substances, we look forward to future research findings about 34946-82-2

Reference£º
Article; Schroeder, Sven; Frey, Wolfgang; Maas, Gerhard; Zeitschrift fur Naturforschung, B: Chemical Sciences; vol. 71; 6; (2016); p. 683 – 696;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

Share a compound : Copper(II) trifluoromethanesulfonate

34946-82-2, As the paragraph descriping shows that 34946-82-2 is playing an increasingly important role.

34946-82-2, Copper(II) trifluoromethanesulfonate is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Was added to the Schlenk tube Cu(OTf)2 (0.01mmol), ligand (Ra,S,S)-I-Ph (0.01mmol) N2 protection, the solvent was added CHCl3(2 mL), stirred at room temperature for 4 hours ligand, and concentrated under reduced pressure, vacuum drained, i.e., quantitative complex to give [(Ra,S,S)-I-Ph]Cu(OTf)2.

34946-82-2, As the paragraph descriping shows that 34946-82-2 is playing an increasingly important role.

Reference£º
Patent; Zhejiang University; Lin Xufeng; Gu Haorui; Sun Weiye; (21 pag.)CN108794420; (2018); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

New downstream synthetic route of Copper(II) trifluoromethanesulfonate

34946-82-2, As the paragraph descriping shows that 34946-82-2 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.34946-82-2,Copper(II) trifluoromethanesulfonate,as a common compound, the synthetic route is as follows.

To a solution of ligand L1 (50 mg, 0.2 mmol) in ethyl acetate(3 mL) was added a saturated solution of copper(II) trifluoromethanesulfonate(Cu(OTf)2) in ethyl acetate (2 mL).A blue-green precipitate appeared within 10 min, whichwas transformed into green-brown hexagonal crystalsduring slow evaporation of the solvent on standing withair contact. The crystals were collected by filtration withsuction, washed with a small volume of ethyl acetate toremove co-precipitated Cu(OTf)2. Yield: 85 mg (95%); M.p.272-274C. – IR (KBr): = 3262 m br (NH), 3147 w, 3103w, 1645 m, 1597 s, 1296 vs, 1253 vs, 1228 s, 1148 s, 1076 m,1059 m, 1029 vs, 757 w, 729 s, 629 s, 575 m, 520 m cm-1. -MS ((+)-MALDI-TOF): m/z (%) = 666.24 (100) [M-CF3SO3]+,516.26 (15) [M-2CF3SO3-H]+, 228.16 (74) [L1+H]+. – Anal. forC26H26CuF6N10O6S2 (816.21): calcd. C 38.26, H 3.21, N 17.16;found C 38.25, H 3.49, N 16.92.

34946-82-2, As the paragraph descriping shows that 34946-82-2 is playing an increasingly important role.

Reference£º
Article; Schroeder, Sven; Frey, Wolfgang; Maas, Gerhard; Zeitschrift fur Naturforschung, B: Chemical Sciences; vol. 71; 6; (2016); p. 683 – 696;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

Some tips on Copper(II) trifluoromethanesulfonate

With the complex challenges of chemical substances, we look forward to future research findings about 34946-82-2,belong copper-catalyst compound

As a common heterocyclic compound, it belongs to copper-catalyst compound, name is Copper(II) trifluoromethanesulfonate, and cas is 34946-82-2, its synthesis route is as follows.,34946-82-2

General procedure: Copper(II) complexes with 4,7-phenanthroline, [Cu(NO3)2(4,7-Hphen)2](NO3)2 (1) and [Cu(CF3SO3)(4,7-phen)2(H2O)2]CF3SO3 (2)were synthesized according to the modified procedure for thepreparation of copper(II) complexes with aromatic N-heterocycles[22]. The solution of 0.5 mmol of CuX2 salt (120.8 mg of Cu(NO3)2-3H2O for 1 and 180.8 mg of Cu(CF3SO3)2 for 2) in 5.0 mL of ethanolwas added slowly under stirring to the solution containing anequimolar amount of 4,7-phen (90.1 mg) in 5.0 mL of ethanol.The reaction mixture was stirred at room temperature for 3-4 h.Complex 1 crystallized from the mother ethanol solution after itscooling in the refrigerator for three days, while those of complex2 were obtained after recrystallization of the solid product precipitatedfrom the reaction mixture in 10.0 mL of acetonitrile. Theblue crystals of 1 and green crystals of 2 suitable for single-crystalX-ray crystallography were filtered off and dried at ambient temperature.Yield (calculated on the basis of 4,7-phen): 99.4 mg(59%) for 1 and 127.0 mg (67%) for 2.

With the complex challenges of chemical substances, we look forward to future research findings about 34946-82-2,belong copper-catalyst compound

Reference£º
Article; Stevanovi?, Nevena Lj.; Andrejevi?, Tina P.; Crochet, Aurelien; Ilic-Tomic, Tatjana; Dra?kovi?, Nenad S.; Nikodinovic-Runic, Jasmina; Fromm, Katharina M.; Djuran, Milo? I.; Gli?i?, Biljana ?.; Polyhedron; vol. 173; (2019);,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

Some scientific research about Copper(II) trifluoromethanesulfonate

34946-82-2 Copper(II) trifluoromethanesulfonate 2734996, acopper-catalyst compound, is more and more widely used in various fields.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.34946-82-2,Copper(II) trifluoromethanesulfonate,as a common compound, the synthetic route is as follows.

To a solution ofTX-CH2COOH (1 g, 3.7 mmol) in distilled water (50 mL), was addedNaOH (148 mg, 3.7 mmol) to give sodium thioxanthone carboxylate (Na+TX-CH2COO-). Tothis solution Cu(OTf)2 (670 mg, 1.85 mmol) was added upon whichCu(TX)2 formed as a green precipitate. The resultant was separatedby filtration and dried in vacuo to obtain a greensolid. Yield 62%. Elementalanalysis; Calculated: C 66.90%; H 3.37%; O 17.82%; S 11.91%. Found: C 61.13%, H4.75%, O 18.97, S 14.25%. Melting point: 232 C., 34946-82-2

34946-82-2 Copper(II) trifluoromethanesulfonate 2734996, acopper-catalyst compound, is more and more widely used in various fields.

Reference£º
Article; Dadashi-Silab, Sajjad; Yagci, Yusuf; Tetrahedron Letters; vol. 56; 46; (2015); p. 6440 – 6443;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

 

Some tips on Copper(II) trifluoromethanesulfonate

With the rapid development of chemical substances, we look forward to future research findings about 34946-82-2

Copper(II) trifluoromethanesulfonate, cas is 34946-82-2, it is a common heterocyclic compound, the copper-catalyst compound, its synthesis route is as follows.,34946-82-2

A solution of Cu(OTf)2 (90.0 mg, 0.249 mM) in methanol was added to a solution of HLpz (57.0 mg, 0.250 mM) and triethylamine (25.0 mg, 0.250 mM) in methanol, affording a dark blue solution. A solution of NaN3 (16.3 mg, 0.250 mM) was then layered on the above solution from which blue crystals of 4 suitable for X-ray analysis were obtained (54 mg, 65% yield). Anal. Calcd for C12H11CuN7O: C,43.31; H, 3.33; N, 29.46. Found: C, 43.68; H, 3.35; N, 29.59. UV-vis (CH3OH) lambdamax, nm(epsilon, M-1 cm-1)]: 346 (5000), 637 (240). FTIR (KBr): 2855, 2054, 1624, 1366, 1168, 1043,773 cm-1. EPR (9.447 GHz, Mod. Amp. 5.0 G, CH3OH, 77 K): g|| = 2.249, g? 2:037,and A|| = 170 G. ESI-MS (MeOH): m/z = 355 [Cu(Lpz)N3 + Na]+, 687 {[Cu(Lpz)N3]2 + Na}+, 1019 {[Cu(Lpz)N3]3 + Na}+.

With the rapid development of chemical substances, we look forward to future research findings about 34946-82-2

Reference£º
Article; Houser, Robert P.; Wang, Zhaodong; Powell, Douglas R.; Hubin, Timothy J.; Journal of Coordination Chemistry; vol. 66; 23; (2013); p. 4080 – 4092;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”