Tag: M.W:400-500

It is a common heterocyclic compound, the copper-catalyst compound, [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride, cas is 578743-87-0 its synthesis route is as follows.,578743-87-0

l-(lH-benzimidazol-2-yl)-isoquinoline (46 mg, 0.19 mmol) was dissolved in 10 mL of dry THF under N2 and this solution was transferred via cannula to suspension of sodium hydride (8.36 mg, 0.209 mmol, 60% in mineral oil) in dry THF. The reaction mixture was stirred at RT for 1 h and then chloro[l,3-bis(2,6-di-i-propylphenyl)imidazol-2- ylidene]copper(I) (92.6 mg, 0.19 mmol) was added. The reaction mixture was stirred at RT for 3 h. The resulting mixture was filtered through Celite and solvent was removed by rotary evaporation. Recrystallization by vapor diffusion of Et20 into a CH2C12 solution of product gave 50 mg (38%) of orange crystals.

With the complex challenges of chemical substances, we look forward to future research findings about [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride

Reference£º
Patent; THE UNIVERSITY OF SOUTHERN CALIFORNIA; THOMPSON, Mark; DJUROVICH, Peter; KRYLOVA, Valentina; WO2011/63083; (2011); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.578743-87-0,[1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride,as a common compound, the synthetic route is as follows.,578743-87-0

Chloro[l ,3-bis(2,6-di-i-propylphenyl)imidazol-2-ylidene]copper(I) (121.9 mg, 0.25 mmol) and silver triflate (64.2 mg, 0.25 mmol) were mixed under nitrogen in 25 mL flask and 10 mL of dry THF were added. Reaction mixture was stirred at RT for 30 minutes. Solution of 1 , 10-phenanthroline (45.05 mg, 0.25 mmol) in dry THF (5 mL) was added. Reaction mixture turned yellow and was stirred at RT overnight. Resulting mixture was filtered through Celite and solvent was evaporated on rotovap. Recrystallization from CH2Ch by vapor diffusion of Et20 gave 120 mg (61.4%) of yellow crystals. Anal, calcd. for C40H44CUF3N4O3S: C, 61.48; H, 5.68; N, 7.17; Found: C, 61.06; H, 5.61; N, 7.14. Structure was confirmed by IH-NMR spectrum of [(IPR)Cu(phen)]OTf (CDCb, 400MHz).

The synthetic route of 578743-87-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; THE UNIVERSITY OF SOUTHERN CALIFORNIA; THOMPSON, Mark; DJUROVICH, Peter; KRYLOVA, Valentina; WO2011/63083; (2011); A1;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belongs to copper-catalyst compound, name is [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride, and cas is 578743-87-0, its synthesis route is as follows.,578743-87-0

In a flame-dried Schlenk tube under argon atmosphere, [CuCl(IPr)] (1) (0.3mmol, 150mg, 1 equiv.) and KCN (0.3mmol, 19mg, 1 equiv.) were introduced in degassed MeOH (5mL) and the reaction mixture was stirred under reflux (50C) for 4h. After returning to room temperature, the reaction mixture was concentrated to dryness under vacuum. The complex was then dissolved in dichloromethane and filtered through a pad of Celite and concentrated again under vacuum. A purification by recrystallization by slow diffusion of pentane in a THF solution of the complex led to the pure complex (4) as a white powder (143mg, 97% yield). 1H-NMR (CDCl3, 400MHz): delta 1.22 (d, J=6.9Hz, 12H), 1.27 (d, J=6.9Hz, 12H), 2.50 (sept, J=6.9Hz, 4H), 7.14 (s, 2H), 7.30 (d, J=7.8Hz, 4H), 7.50 (t, J=7.8Hz, 4H) ppm. (spectroscopic data in good agreement with the literature) [54].

With the complex challenges of chemical substances, we look forward to future research findings about [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride

Reference£º
Article; Elie, Margaux; Mahoro, Gilbert Umuhire; Duverger, Eric; Renaud, Jean-Luc; Daniellou, Richard; Gaillard, Sylvain; Journal of Organometallic Chemistry; vol. 893; (2019); p. 21 – 31;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belongs to copper-catalyst compound, name is [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride, and cas is 578743-87-0, its synthesis route is as follows.,578743-87-0

1) 0.2 mmol (NHC) CuCl was dissolved in 3 ml of dry THF in a 20 ml dry glass bottle to form a suspension,The glass was then placed in a glove box refrigerator and frozen at -35 C for 1 h;2) 42.3 mg (0.95 eq) [tBu3PN] Li was dissolved in 3 ml of dry THF in another 20 ml dry glass vial,And then put the glass bottle into the glove box refrigerator,Frozen at -35 C for 1 h;3) Slowly drop the [tBu3PN] Li solution of 2) in a cold (NHC) CuCl suspension in 1) with stirring,After completion of the dropwise addition, the mixture was stirred in a glove box at room temperature for 13 h;4) After completion of the reaction, the solvent (THF) was dried in vacuo to give an oily slag,Followed by the addition of 7 ml of n-pentane or n-hexane to give a suspension,And stirred at room temperature for 15 min,And then through the neutral diatomite short pad filter to remove insoluble matter,The filtrate was placed in a refrigerator and cooled at -35 C for 3-4 h,And then filtered through neutral diatomaceous earth,And then frozen the filtrate,Repeated several times to obtain a clear n-pentane or n-hexane solution,The clear solution was dried to give a white crystalline solid,Ie complex A or B.

With the complex challenges of chemical substances, we look forward to future research findings about 578743-87-0,belong copper-catalyst compound

Reference£º
Patent; Shan, Xida; Bai, Tao; Yang, Yanhui; (31 pag.)CN106243132; (2016); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.578743-87-0,[1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride,as a common compound, the synthetic route is as follows.,578743-87-0

In a dry double-mouth bottle to place Pt – 3 (0.0594 g, 0.1 mmol), CuClNHC (0.0488 g, 0.1 mmol), vacuum pumping and nitrogen cycle three times, then the nitrogen flow by adding 10 ml ethanol, stirring reflux reaction for 4 hours, cooling to room temperature, then added potassium hexafluorophosphate (0.184 g, 1 mmol), stirring at the room temperature reaction 2 hours, filtered, concentrated filtrate, ethanol: dichloromethane=1:10 column, get the orange solid 0.047 g, and the yield is 40%.

578743-87-0 [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride 0, acopper-catalyst compound, is more and more widely used in various fields.

Reference£º
Patent; Jiangsu University Of Science And Technology; Shi Chao; Li Qiuxia; Zhang Xinghua; (24 pag.)CN108690096; (2018); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

[1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride, cas is 578743-87-0, it is a common heterocyclic compound, the copper-catalyst compound, its synthesis route is as follows.,578743-87-0

In a dry double-mouth bottle to place Pt – 2 (0.0594 g, 0.1 mmol), CuClNHC (0.0488 g, 0.1 mmol), vacuum pumping and nitrogen cycle three times, then the nitrogen flow by adding 10 ml ethanol, stirring reflux reaction for 4 hours, cooling to room temperature, then added potassium hexafluorophosphate (0.184 g, 1 mmol), stirring at the room temperature reaction 2 hours, filtered, concentrated filtrate, ethanol: dichloromethane=1:10 column, get the orange solid 0.047 g, and the yield is 40%.

With the rapid development of chemical substances, we look forward to future research findings about [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride

Reference£º
Patent; Jiangsu University Of Science And Technology; Shi Chao; Li Qiuxia; Zhang Xinghua; (24 pag.)CN108690096; (2018); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

578743-87-0, [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride is a copper-catalyst compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

578743-87-0, General procedure: To a stirred solution of imidazolium salts (0.045 mmol), NaOtBu (4.3 mg, 0.045 mmol) and CuCl (4.5mg, 0.045 mmol) was added THF (0.5 mL, 0.09 M) at 30 oC under argon atmosphere. After stirring for 2 h, the solution of K+[CF3B(OMe)3]- (63.5 mg, 0.3 mmol, 6.0 equiv) in DMF (0.5 mL) was added dropwise. Then the mixture was kept stirring at 30 oC for 10 h. After that, the reaction was quenched with water. Aqueous layer was extracted with EtOAc (15 mL x 3), and the combined organic layers was washed with brine, dried over Na2SO4 and concentrated under reduced pressure. Then the crude product was purified by column chromatography on silica gel to give the imidazolinone 3b-d.

As the paragraph descriping shows that 578743-87-0 is playing an increasingly important role.

Reference£º
Article; Zeng, Wei; Wang, Enyu; Qiu, Rui; Sohail, Muhammad; Wu, Shaoxiang; Chen, Fu-Xue; Journal of Organometallic Chemistry; vol. 743; (2013); p. 44 – 48;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

As a common heterocyclic compound, it belongs to copper-catalyst compound, name is [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride, and cas is 578743-87-0, its synthesis route is as follows.,578743-87-0

General procedure: Cu(I)-NHC 1a-g (0.04 mmol, 1.0 equiv) and CDCl3 (0.4 mL, degassed by bubbling argon for 30 min) were added into a flame-dried NMR tube. (CD3)2SO (0.4 mL) was used for 1h (0.04 mmol), 1i (0.02 mmol), and 1j (0.02 mmol). The NMR tube was closed with a septum and equipped with an air balloon (approximate 500 mL) containing approximately 100 mL of O2 (4.5 mmol, 112 equiv.) and approximately 12.6 mL of H2O (gas, 0.56 mmol, 14 equiv., air relative humidity = 75%). The solution (not agitated) was placed at room temperature and was monitored by 1H NMR. 100 C was used for the decomposition of 1h, and 150 C was used for the decomposition of 1i and 1j. The precipitate in the NMR tube was removed by quick filtration using a membrane filter before each 1H NMR measurement. The ratio of Cu-NHC, urea, and imidazolium were calculated through the integration of 1H NMR, using the normalization method. The characterization of products could be found in the previous study [32].

With the complex challenges of chemical substances, we look forward to future research findings about 578743-87-0,belong copper-catalyst compound

Reference£º
Article; Li, Dazhi; Ollevier, Thierry; Journal of Organometallic Chemistry; vol. 906; (2020);,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.578743-87-0, [1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride it is a common compound, a new synthetic route is introduced below., 578743-87-0

In a dry double-mouth bottle to place Pt – 1 (0.0544 g, 0.1 mmol), CuClNHC (0.0488 g, 0.1 mmol), vacuum pumping and nitrogen cycle three times, then the nitrogen flow by adding 10 ml ethanol, stirring reflux reaction for 4 hours, cooling to room temperature, then added potassium hexafluorophosphate (0.184 g, 1 mmol), stirring at the room temperature reaction 2 hours, filtered, concentrated filtrate, ethanol: dichloromethane=1:10 column, get the orange solid 0.045 g, and the yield is 40%.

With the complex challenges of chemical substances, we look forward to future research findings about 578743-87-0,belong copper-catalyst compound

Reference£º
Patent; Jiangsu University Of Science And Technology; Shi Chao; Li Qiuxia; Zhang Xinghua; (24 pag.)CN108690096; (2018); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”

[1,3-Bis(2,6-diisopropylphenyl)imidazol-2-ylidene]copper chloride, cas is 578743-87-0, it is a common heterocyclic compound, the copper-catalyst compound, its synthesis route is as follows.,578743-87-0

In a dry double-mouth bottle to place Ir – 3 (0.0796 g, 0.1 mmol), CuClNHC (0.0488 g, 0.1 mmol), vacuum pumping and nitrogen cycle three times, then the nitrogen flow by adding 10 ml ethanol, stirring reflux reaction for 4 hours, cooling to room temperature, then added potassium hexafluorophosphate (0.184 g, 1 mmol), stirring at the room temperature reaction 2 hours, filtered, concentrated filtrate, ethanol: dichloromethane=1:10 column, get the orange solid 0.069 g, and the yield is 50%.

As the rapid development of chemical substances, we look forward to future research findings about 578743-87-0

Reference£º
Patent; Jiangsu University Of Science And Technology; Shi Chao; Li Qiuxia; Zhang Xinghua; (24 pag.)CN108690096; (2018); A;,
Copper catalysis in organic synthesis – NCBI
Special Issue “Fundamentals and Applications of Copper-Based Catalysts”